Skip to content

Middleton Fire and EMS Frequencies

We do not have frequencies listed specifically for Middleton in Strafford County, New Hampshire yet. Countywide channels for Strafford County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Manchester Simulcast (Manchester), about 44 miles away.

About Middleton Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Middleton: Strafford County Fire 151.1525 MHz, narrow FM, 210.7 PL; UNH Fire Alarm 154.6575 MHz, narrow FM, 131 DPL.

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Strafford County channels that also cover Middleton

Fire Dispatch

Fire Dispatch frequencies for Strafford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Strafford County FireFire Operations151.1525
In 154.0325
210.7 PLFMNWRHV643
Strafford County FireFire Operations151.4375
In 155.6475
210.7 PLFMNWRHV643
UNH Fire AlarmWilliamson Hall Repeater154.6575
In 151.4300
131 DPLFMNKNJL459
UNH Fire AlarmBarrington Repeater156.1050
In 151.4300
131 DPLFMNKNJL459
UNH Fire AlarmBarrington Repeater (Dual Mode)156.1050
In 151.4300
NAC 131P25KNJL459

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Strafford County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Strafford County FireCounty Police & Fire Tactical153.9650210.7 PLFMNWRHV413
Strafford County FireCounty Police & Fire Tactical155.9925210.7 PLFMNWRHV413
Strafford County FireCounty Police & Fire Tactical156.0300210.7 PLFMNKCD839
Strafford County FireCounty Police & Fire Tactical158.7750210.7 PLFMNWPWJ660
Strafford County FireCounty Police & Fire Tactical158.8725210.7 PLFMNWRHV413
Strafford County FireCounty Police & Fire Tactical159.1200210.7 PLFMNKCD999

Nearest trunked radio sites

Distances are measured from the center of Middleton.

Manchester Simulcast · Manchester
RFSS 1 · Site 1 (hex 1) · NAC 8A1 · about 44 mi away
Control 857.9375, 858.2125, 858.4875, 859.4875
Voice 854.0625, 854.9875, 856.2125, 856.4875, 856.7625, 857.2375, 857.4875
Colonial Drive · Litchfield
Site 1 (hex 1) · about 51 mi away
Voice 453.15, 453.5
Highlander Ct · Litchfield
Site 2 (hex 2) · about 51 mi away
Voice 460.1875, 460.525
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Middleton?

We do not have a fire dispatch channel listed specifically for Middleton. The county-level fire dispatch channels in the same county: Strafford County Fire 151.1525 MHz, narrow FM, 210.7 PL; UNH Fire Alarm 154.6575 MHz, narrow FM, 131 DPL.

What scanner do I need to listen to fire and EMS in Middleton?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Middleton?

For Middleton, start with the Manchester Simulcast site of Manchester. Its control channels are 857.9375, 858.2125, 858.4875, 859.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.