Skip to content

Bow Fire and EMS Frequencies

We do not have frequencies listed specifically for Bow in Merrimack County, New Hampshire yet. Countywide channels for Merrimack County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Manchester Simulcast (Manchester), about 13 miles away.

About Bow Fire and EMS Frequencies

We don't have any verified fire and EMS frequencies for Bow yet, but we're working on adding some.

If you know of any, or spot something wrong on a nearby page, please send it to contact@fire-frequencies.com and we'll check it against the official records.

Nearest trunked radio sites

Distances are measured from the center of Bow.

Manchester Simulcast · Manchester
RFSS 1 · Site 1 (hex 1) · NAC 8A1 · about 13 mi away
Control 857.9375, 858.2125, 858.4875, 859.4875
Voice 854.0625, 854.9875, 856.2125, 856.4875, 856.7625, 857.2375, 857.4875
Colonial Drive · Litchfield
Site 1 (hex 1) · about 17 mi away
Voice 453.15, 453.5
Highlander Ct · Litchfield
Site 2 (hex 2) · about 17 mi away
Voice 460.1875, 460.525
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What are the control channels for trunked radio in Bow?

For Bow, start with the Manchester Simulcast site of Manchester. Its control channels are 857.9375, 858.2125, 858.4875, 859.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.