Skip to content

Goffstown Fire and EMS Frequencies

Goffstown in Hillsborough County, New Hampshire has 3 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Manchester Simulcast (Manchester), about 7 miles away.

About Goffstown Fire and EMS Frequencies

Quick answer: Fire dispatch for Goffstown: Goffstown Fire 158.8800 MHz, narrow FM, 136.5 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Goffstown conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Goffstown
AgencyDescriptionFrequency (MHz)ToneModeFCC
Goffstown FireFire/EMS Operations – Analog158.8800
In 154.2950
136.5 PLFMNWPUQ582
Goffstown FireFire/EMS Operations – Primary158.8800
In 150.7750
NAC 497P25WPUQ582

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Goffstown
AgencyDescriptionFrequency (MHz)ToneModeFCC
Goffstown FireFire "Operations-1" Fireground159.1050127.3 PLFMNKNIH905

Hillsborough County channels that also cover Goffstown

EMS Talk-around

EMS Talk-around frequencies for Hillsborough County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hillsborough County EMSAmerican Medical Response*AMR* (Goffstown Area)152.3300411 DPLFMNWPMX533

Nearest trunked radio sites

Distances are measured from the center of Goffstown.

Manchester Simulcast · Manchester
RFSS 1 · Site 1 (hex 1) · NAC 8A1 · about 7 mi away
Control 857.9375, 858.2125, 858.4875, 859.4875
Voice 854.0625, 854.9875, 856.2125, 856.4875, 856.7625, 857.2375, 857.4875
Colonial Drive · Litchfield
Site 1 (hex 1) · about 9 mi away
Voice 453.15, 453.5
Highlander Ct · Litchfield
Site 2 (hex 2) · about 9 mi away
Voice 460.1875, 460.525
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Goffstown?

Fire dispatch channels listed for Goffstown: Goffstown Fire 158.8800 MHz, narrow FM, 136.5 PL.

What scanner do I need to listen to fire and EMS in Goffstown?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Goffstown?

For Goffstown, start with the Manchester Simulcast site of Manchester. Its control channels are 857.9375, 858.2125, 858.4875, 859.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Goffstown fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Goffstown are marked encrypted.