Skip to content

Bedford Fire and EMS Frequencies

Bedford in Hillsborough County, New Hampshire has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Manchester Simulcast (Manchester), about 0 miles away.

About Bedford Fire and EMS Frequencies

Quick answer: Fire dispatch for Bedford: Bedford Fire 156.1800 MHz, P25, NAC 237.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Bedford conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Bedford
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bedford FireFire Operations156.1800
In 159.4350
NAC 237P25WQFT441
Bedford FireFire Operations Simulcast159.3225103.5 PLFMNWQFT441

Hillsborough County channels that also cover Bedford

EMS Talk-around

EMS Talk-around frequencies for Hillsborough County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hillsborough County EMSAmerican Medical Response*AMR* (Goffstown Area)152.3300411 DPLFMNWPMX533

Nearest trunked radio sites

Distances are measured from the center of Bedford.

Manchester Simulcast · Manchester
RFSS 1 · Site 1 (hex 1) · NAC 8A1 · about 0 mi away
Control 857.9375, 858.2125, 858.4875, 859.4875
Voice 854.0625, 854.9875, 856.2125, 856.4875, 856.7625, 857.2375, 857.4875
Colonial Drive · Litchfield
Site 1 (hex 1) · about 9 mi away
Voice 453.15, 453.5
Highlander Ct · Litchfield
Site 2 (hex 2) · about 9 mi away
Voice 460.1875, 460.525
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bedford?

Fire dispatch channels listed for Bedford: Bedford Fire 156.1800 MHz, P25, NAC 237.

What scanner do I need to listen to fire and EMS in Bedford?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Bedford?

For Bedford, start with the Manchester Simulcast site of Manchester. Its control channels are 857.9375, 858.2125, 858.4875, 859.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bedford fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Bedford are marked encrypted.