About Litchfield Fire and EMS Frequencies
Quick answer: Fire dispatch for Litchfield: Litchfield Fire 151.1075 MHz, narrow FM, 97.4 PL. Trunked: Litchfield, for example Litchfield Fire talkgroup 20 (hex 14).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Litchfield: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Litchfield, start with the Nashua Simulcast site of Nashua, about 6 miles away. Its control channels: 852.55, 852.75, 853.2625 MHz.
Data updated .
Litchfield conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Litchfield Fire | Fire Operations | 151.1075 In 154.3400 | 97.4 PL | FMN | WQIS936 |
Litchfield trunked talkgroups
Litchfield
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Litchfield Fire | Fire Operations | 20 | 14 | T |
Hillsborough County channels that also cover Litchfield
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hillsborough County EMS | American Medical Response*AMR* (Goffstown Area) | 152.3300 | 411 DPL | FMN | WPMX533 |
Nearest trunked radio sites
Distances are measured from the center of Litchfield.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Litchfield?
Fire dispatch channels listed for Litchfield: Litchfield Fire 151.1075 MHz, narrow FM, 97.4 PL.
Do fire departments and EMS use a trunked radio system in Litchfield?
Yes. Fire and EMS talkgroups are listed for Litchfield: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Litchfield?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Litchfield?
For Litchfield, start with the Nashua Simulcast site of Nashua. Its control channels are 852.55, 852.75, 853.2625, 853.45 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Litchfield fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Litchfield are marked encrypted.
Are Litchfield fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Litchfield are marked encrypted.