About Nashua Fire and EMS Frequencies
Quick answer: Fire dispatch for Nashua: Nashua Fire 151.2500 MHz, narrow FM, 103.5 PL. EMS dispatch for Nashua: Nashua EMS 155.3625 MHz, narrow FM, 423 DPL. Trunked: Nashua, for example Nashua Fire talkgroup 2049 (hex 801).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Nashua: 15 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Nashua, start with the Nashua Simulcast site of Nashua, about 4 miles away. Its control channels: 852.55, 852.75, 853.2625 MHz.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Nashua conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Nashua Fire | Fire Operations (Simulcast from trunked system) | 151.2500 | 103.5 PL | FMN | KCA694 |
| Nashua Fire | Fireground Patch – Mutual Aid | 154.3250 | 103.5 PL | FMN | KCA694 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Nashua EMS | Nashua EMS – Dispatch | 155.3625 | 423 DPL | FMN | WPMG678 |
Nashua trunked talkgroups
Nashua
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Nashua Fire | Nashua Fire – Dispatch | 2049 | 801 | D |
| Nashua Fire | Nashua Fire – Fire Ground | 2051 | 803 | D |
| Nashua Fire | Nashua Fire – Fire Ground | 2053 | 805 | D |
| Nashua Fire | Nashua Fire – Fire Ground | 2055 | 807 | D |
| Nashua Fire | Nashua Fire – Fire Ground | 2057 | 809 | D |
| Nashua Fire | Fire Announcement | 2059 | 80b | D |
| Nashua Fire | Nashua Fire – Fire Ground | 2043 | 7fb | D |
| Nashua Fire | Fire Alarm Maintenance – Mechanics | 2063 | 80f | D |
| Nashua Fire | Nashua Fire – Fire Ground | 2075 | 81b | D |
| Nashua Fire | Nashua Fire – Fire Ground | 2077 | 81d | D |
| Nashua Fire | Nashua Fire – Dispatch | 2081 | 821 | D |
| Nashua Fire | Nashua Fire – Tactical Channel | 2061 | 80d | D |
| Nashua Fire | Nashua Fire – Tactical Channel | 2079 | 81f | D |
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Nashua Fire | Fire Police | 2073 | 819 | D Encrypted |
| Nashua Fire | HIPAA Channel | 2083 | 823 | D Encrypted |
Hillsborough County channels that also cover Nashua
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hillsborough County EMS | American Medical Response*AMR* (Goffstown Area) | 152.3300 | 411 DPL | FMN | WPMX533 |
Nearest trunked radio sites
Distances are measured from the center of Nashua.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Nashua?
Fire dispatch channels listed for Nashua: Nashua Fire 151.2500 MHz, narrow FM, 103.5 PL.
What frequency does EMS or the ambulance service use in Nashua?
EMS dispatch channels listed for Nashua: Nashua EMS 155.3625 MHz, narrow FM, 423 DPL.
Do fire departments and EMS use a trunked radio system in Nashua?
Yes. Fire and EMS talkgroups are listed for Nashua: 15 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Nashua?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Nashua?
For Nashua, start with the Nashua Simulcast site of Nashua. Its control channels are 852.55, 852.75, 853.2625, 853.45 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Nashua fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Nashua are marked encrypted.
Are Nashua fire and EMS talkgroups encrypted?
2 of the 15 talkgroups listed for Nashua are marked fully or partly encrypted; a scanner cannot decode encrypted audio.