Skip to content

Hollis Fire and EMS Frequencies

Hollis in Hillsborough County, New Hampshire has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Nashua Simulcast (Nashua), about 9 miles away.

About Hollis Fire and EMS Frequencies

Quick answer: Fire dispatch for Hollis: Hollis Fire 151.4750 MHz, narrow FM, 127.3 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Hollis conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Hollis
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hollis FireFire/Rescue Operations151.4750
In 151.1600
127.3 PLFMNKDC288

Hillsborough County channels that also cover Hollis

EMS Talk-around

EMS Talk-around frequencies for Hillsborough County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hillsborough County EMSAmerican Medical Response*AMR* (Goffstown Area)152.3300411 DPLFMNWPMX533

Nearest trunked radio sites

Distances are measured from the center of Hollis.

Nashua Simulcast · Nashua
RFSS 1 · Site 2 (hex 2) · NAC 5C2 · about 9 mi away
Control 852.55, 852.75, 853.2625, 853.45
Voice 851.05, 851.6, 851.775, 851.975, 852.3625, 853.5125
Highlander Ct · Litchfield
Site 2 (hex 2) · about 13 mi away
Voice 460.1875, 460.525
Colonial Drive · Litchfield
Site 1 (hex 1) · about 13 mi away
Voice 453.15, 453.5
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hollis?

Fire dispatch channels listed for Hollis: Hollis Fire 151.4750 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Hollis?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Hollis?

For Hollis, start with the Nashua Simulcast site of Nashua. Its control channels are 852.55, 852.75, 853.2625, 853.45 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hollis fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Hollis are marked encrypted.