Skip to content

Hudson Fire and EMS Frequencies

Hudson in Hillsborough County, New Hampshire has 4 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Nashua Simulcast (Nashua), about 1 miles away.

About Hudson Fire and EMS Frequencies

Quick answer: Fire dispatch for Hudson: Hudson Fire 155.9550 MHz, P25, NAC 370.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Hudson conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Hudson
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hudson FireFire Operations155.9550
In 154.6800
NAC 370P25KKC978

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hudson
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hudson FireHudson Fire – Tactical Channel153.9500NAC 370P25KCD795
Hudson FireFire Training (NAC 370)154.9800NAC 370P25WPMB331
Hudson FireFire Training (NAC 370)155.6925NAC 370P25WQMB598

Hillsborough County channels that also cover Hudson

EMS Talk-around

EMS Talk-around frequencies for Hillsborough County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hillsborough County EMSAmerican Medical Response*AMR* (Goffstown Area)152.3300411 DPLFMNWPMX533

Nearest trunked radio sites

Distances are measured from the center of Hudson.

Nashua Simulcast · Nashua
RFSS 1 · Site 2 (hex 2) · NAC 5C2 · about 1 mi away
Control 852.55, 852.75, 853.2625, 853.45
Voice 851.05, 851.6, 851.775, 851.975, 852.3625, 853.5125
Manchester Simulcast · Manchester
RFSS 1 · Site 1 (hex 1) · NAC 8A1 · about 13 mi away
Control 857.9375, 858.2125, 858.4875, 859.4875
Voice 854.0625, 854.9875, 856.2125, 856.4875, 856.7625, 857.2375, 857.4875
Highlander Ct · Litchfield
Site 2 (hex 2) · about 18 mi away
Voice 460.1875, 460.525
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hudson?

Fire dispatch channels listed for Hudson: Hudson Fire 155.9550 MHz, P25, NAC 370.

What scanner do I need to listen to fire and EMS in Hudson?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Hudson?

For Hudson, start with the Nashua Simulcast site of Nashua. Its control channels are 852.55, 852.75, 853.2625, 853.45 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Hudson fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Hudson are marked encrypted.