Skip to content

Windham Fire and EMS Frequencies

Windham in Rockingham County, New Hampshire has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Nashua Simulcast (Nashua), about 6 miles away.

About Windham Fire and EMS Frequencies

Quick answer: Fire dispatch for Windham: Windham Fire 154.1750 MHz, P25, NAC 907.

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Windham conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Windham
AgencyDescriptionFrequency (MHz)ToneModeFCC
Windham FireFire Operations154.1750
In 159.3675
NAC 907P25WPKV459

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Windham
AgencyDescriptionFrequency (MHz)ToneModeFCC
Windham FireWindham Fire – Tactical Channel155.8425
In 159.0675
NAC 907P25WQYJ215

Rockingham County channels that also cover Windham

Fire Dispatch

Fire Dispatch frequencies for Rockingham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pease Air National Guard Base FireFire Operations173.5875136.5 PLFMN—
Seacoast Fire (Rockingham Net)Seacoast Fire Mutual Aid Dispatch154.1900
In 156.0075
136.5 PLFMNWNEB875

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Rockingham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Seacoast Fire (Rockingham Net)Rock County Fireground153.7775131.8 PLFMNWNEB875
Seacoast Fire (Rockingham Net)Seacoast Fire (Rockingham Net) – Fire Ground153.8975136.5 PLFMNWNEB875
Seacoast Fire (Rockingham Net)Seacoast Fire (Rockingham Net) – Fire Ground153.9725186.2 PLFMNWNEB875
Seacoast Fire (Rockingham Net)South Central Rock County Fireground154.1600136.5 PLFMNKBT790
Seacoast Fire (Rockingham Net)Rock County Fireground154.437588.5 PLFMNWNEB875

Fire Talk-around

Fire Talk-around frequencies for Rockingham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pease Air National Guard Base FirePease ANG Base Fire173.0500CSQFMN—

Hospitals & Medical

Hospitals & Medical frequencies for Rockingham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Seacoast Fire (Rockingham Net)Med-1 EMS-to-Hospital155.3400141.3 PLFMNKNEM443
Seacoast Fire (Rockingham Net)Med-2 EMS-to-Hospital (rarely used)155.3850141.3 PLFMNKNEM443

Nearest trunked radio sites

Distances are measured from the center of Windham.

Nashua Simulcast · Nashua
RFSS 1 · Site 2 (hex 2) · NAC 5C2 · about 6 mi away
Control 852.55, 852.75, 853.2625, 853.45
Voice 851.05, 851.6, 851.775, 851.975, 852.3625, 853.5125
Manchester Simulcast · Manchester
RFSS 1 · Site 1 (hex 1) · NAC 8A1 · about 15 mi away
Control 857.9375, 858.2125, 858.4875, 859.4875
Voice 854.0625, 854.9875, 856.2125, 856.4875, 856.7625, 857.2375, 857.4875
Highlander Ct · Litchfield
Site 2 (hex 2) · about 22 mi away
Voice 460.1875, 460.525
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Windham?

Fire dispatch channels listed for Windham: Windham Fire 154.1750 MHz, P25, NAC 907.

What scanner do I need to listen to fire and EMS in Windham?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Windham?

For Windham, start with the Nashua Simulcast site of Nashua. Its control channels are 852.55, 852.75, 853.2625, 853.45 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Windham fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Windham are marked encrypted.