About Londonderry Fire and EMS Frequencies
Quick answer: Fire dispatch for Londonderry: Londonderry Fire 156.1125 MHz, P25, NAC 293.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Londonderry conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Londonderry Fire | Fire Operations – Primary | 156.1125 In 151.1750 | NAC 293 | P25 | KQO260 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Londonderry Fire | Fire Department | 158.8875 | NAC 497 | P25 | WPRV211 |
Rockingham County channels that also cover Londonderry
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pease Air National Guard Base Fire | Fire Operations | 173.5875 | 136.5 PL | FMN | — |
| Seacoast Fire (Rockingham Net) | Seacoast Fire Mutual Aid Dispatch | 154.1900 In 156.0075 | 136.5 PL | FMN | WNEB875 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seacoast Fire (Rockingham Net) | Rock County Fireground | 153.7775 | 131.8 PL | FMN | WNEB875 |
| Seacoast Fire (Rockingham Net) | Seacoast Fire (Rockingham Net) – Fire Ground | 153.8975 | 136.5 PL | FMN | WNEB875 |
| Seacoast Fire (Rockingham Net) | Seacoast Fire (Rockingham Net) – Fire Ground | 153.9725 | 186.2 PL | FMN | WNEB875 |
| Seacoast Fire (Rockingham Net) | South Central Rock County Fireground | 154.1600 | 136.5 PL | FMN | KBT790 |
| Seacoast Fire (Rockingham Net) | Rock County Fireground | 154.4375 | 88.5 PL | FMN | WNEB875 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pease Air National Guard Base Fire | Pease ANG Base Fire | 173.0500 | CSQ | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seacoast Fire (Rockingham Net) | Med-1 EMS-to-Hospital | 155.3400 | 141.3 PL | FMN | KNEM443 |
| Seacoast Fire (Rockingham Net) | Med-2 EMS-to-Hospital (rarely used) | 155.3850 | 141.3 PL | FMN | KNEM443 |
Nearest trunked radio sites
Distances are measured from the center of Londonderry.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Londonderry?
Fire dispatch channels listed for Londonderry: Londonderry Fire 156.1125 MHz, P25, NAC 293.
What scanner do I need to listen to fire and EMS in Londonderry?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Londonderry?
For Londonderry, start with the Nashua Simulcast site of Nashua. Its control channels are 852.55, 852.75, 853.2625, 853.45 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Londonderry fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Londonderry are marked encrypted.