Skip to content

Midway Fire and EMS Frequencies

We do not have frequencies listed specifically for Midway in Chaves County, New Mexico yet. Countywide channels for Chaves County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Comanche Hill (New Mexico DTRS), about 7 miles away.

About Midway Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Midway: Chaves County Fire 154.3700 MHz, narrow FM, 179.9 PL.

  • 16 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Chaves County channels that also cover Midway

Fire Dispatch

Fire Dispatch frequencies for Chaves County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chaves County FireFire Paging (includes Chaves County)154.3700179.9 PLFMNKNEL286
Chaves County FirePenasco Valley Fire155.9400
In 153.9650
FMWQDJ941
Chaves County FireFire Paging156.2325179.9 PLFMNWRJC387
Chaves County FireChaves County Fire – Dispatch158.8650
In 153.7700
NAC 385P25WRJA480
Chaves County FireChaves County Fire – Dispatch159.4575
In 154.1450
NAC 385P25WRJC387

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Chaves County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chaves County FireChaves County Fire – Fire Ground154.2800FMWNPE451
Chaves County FireChaves County Fire – Tactical Channel156.0300P25WRJA480
Chaves County FireChaves County Fire – Tactical Channel453.0375FMKD49899
Chaves County FireChaves County Fire – Tactical Channel453.1125100.0 PLFMKD49899
Chaves County FireChaves County Fire – Fire Ground453.1125100.0 PLFMKD49899
Chaves County FireChaves County Fire – Tactical Channel453.4875FMKD49899
Chaves County FireChaves County Fire – Tactical Channel458.0375FMKD49899
Chaves County FireChaves County Fire – Tactical Channel458.112591.5 PLFMKD49899
Chaves County FireChaves County Fire – Fire Ground458.112591.5 PLFMKD49899
Chaves County FireChaves County Fire – Tactical Channel458.4875FMKD49899
Chaves County FireChaves County Fire – Tactical Channel460.5125FMKD49899
Chaves County FireChaves County Fire – Tactical Channel460.5375FMKD49899
Chaves County FireChaves County Fire – Tactical Channel465.5125FMKD49899
Chaves County FireChaves County Fire – Tactical Channel465.5375FMKD49899

Nearest trunked radio sites

Distances are measured from the center of Midway.

Comanche Hill · New Mexico DTRS
RFSS 3 · Site 1 (hex 1) · NAC 850 · about 7 mi away
Control 769.18125
Voice 769.43125, 769.70625, 769.95625
Roswell HD · New Mexico DTRS
RFSS 3 · Site 2 (hex 2) · NAC 850 · about 10 mi away
Control 769.19375, 769.44375, 769.71875
Voice 769.96875
High Lonesome · New Mexico DTRS
RFSS 3 · Site 62 (hex 3E) · NAC 850 · about 26 mi away
Control 770.18125, 770.40625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Midway?

We do not have a fire dispatch channel listed specifically for Midway. The county-level fire dispatch channels in the same county: Chaves County Fire 154.3700 MHz, narrow FM, 179.9 PL.

What scanner do I need to listen to fire and EMS in Midway?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Midway?

For Midway, start with the Comanche Hill site of New Mexico DTRS. Its control channels are 769.18125 MHz. Program a control channel first; the scanner finds the voice channels from it.