Skip to content

Loco Hills Fire and EMS Frequencies

We do not have frequencies listed specifically for Loco Hills in Eddy County, New Mexico yet. Countywide channels for Eddy County that may also cover this area are shown below when we have them. The closest trunked radio site we have is 12 Mile Hill (New Mexico DTRS), about 13 miles away.

About Loco Hills Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Loco Hills: Eddy County Fire 155.7975 MHz, narrow FM, 179.9 PL. Trunked: New Mexico DTRS, for example Eddy County Fire talkgroup 32001 (hex 7d01).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: New Mexico DTRS: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Loco Hills, start with the 12 Mile Hill site of New Mexico DTRS, about 13 miles away. Its control channels: 769.94375, 770.20625, 770.95625 MHz.

Data updated .

Eddy County channels that also cover Loco Hills

Fire Dispatch

Fire Dispatch frequencies for Eddy County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Eddy County FireCounty Fire155.7975179.9 PLFMNWQIT446
Eddy County FireCounty Fire158.7300179.9 PLFMNWQIT446

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Eddy County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Eddy County FireCounty Fire Tactical154.0700FMNWQIY807
Eddy County FireCounty Fire Tactical154.1450FMNWQIY807
Eddy County FireCounty Fire Tactical154.1600FMNWQIY807
Eddy County FireCounty Fire Tactical154.3775FMNWQIY807
Eddy County FireCounty Fire Tactical155.0325FMNWQIY807

New Mexico DTRS

New Mexico DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Eddy County FireEddy County Fire – Dispatch320017d01T
Eddy County FireNorth Operations320027d02T
Eddy County FireSouth Operations320037d03T

Nearest trunked radio sites

Distances are measured from the center of Loco Hills.

12 Mile Hill · New Mexico DTRS
RFSS 3 · Site 37 (hex 25) · NAC 851 · about 13 mi away
Control 769.94375, 770.20625, 770.95625
Voice 774.80625
KMTH · New Mexico DTRS
RFSS 3 · Site 64 (hex 40) · NAC 854 · about 14 mi away
Control 769.16875, 769.41875, 769.66875
Voice 769.91875
Maljamar · Lea County Communication Authority (P25)
Project 25 · RFSS 5 · Site 5 (hex 5) · NAC 00F · about 19 mi away
Control 855.2125, 855.7125, 856.2375, 856.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Loco Hills?

We do not have a fire dispatch channel listed specifically for Loco Hills. The county-level fire dispatch channels in the same county: Eddy County Fire 155.7975 MHz, narrow FM, 179.9 PL.

Do fire departments and EMS use a trunked radio system in Loco Hills?

Yes. The county-level systems that cover Loco Hills are Fire and EMS talkgroups are listed for New Mexico DTRS: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Loco Hills?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Loco Hills?

For Loco Hills, start with the 12 Mile Hill site of New Mexico DTRS. Its control channels are 769.94375, 770.20625, 770.95625 MHz. Program a control channel first; the scanner finds the voice channels from it.