About Pine Valley Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Pine Valley: Ch. 3 Elmira City Fire 460.5875 MHz, P25, NAC 333; Chemung County Fire 155.2500 MHz, narrow FM, 118.8 PL; Webbs Mills Fire Department 453.2875 MHz, narrow FM, 074 DPL.
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Chemung County channels that also cover Pine Valley
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ch. 3 Elmira City Fire | Channel 3 Elmira City Fire | 460.5875 In 465.5875 | NAC 333 | P25 | WQWJ997 |
| Chemung County Fire | Fire Paging | 155.2500 | 118.8 PL | FMN | WQUC671 |
| Webbs Mills Fire Department | Webbs Mills Fire Department – Dispatch | 453.2875 In 458.2875 | 074 DPL | FMN | KNBJ908 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ch. 1 Fire Main | Channel 1 Fire Main | 460.3250 In 465.3250 | NAC 111 | P25 | WQWJ997 |
| Ch. 2 Fire 2 | Channel 2 Fire | 460.3625 In 465.3625 | NAC 222 | P25 | WQWJ997 |
| Ch. 4 Fireground District 1 | Channel 4 Fireground District 1 | 465.1000 | 136.5 PL | FMN | WQON264 |
| Ch. 5 Fireground District 2 | Channel 5 Fireground District 2 | 465.1625 | 136.5 PL | FMN | WQON264 |
| Ch. 6 Fireground District 3 | Channel 6 Fireground District 3 | 465.1875 | 136.5 PL | FMN | WQON264 |
| Ch. 7 Fireground District 4 | Channel 7 Fireground District 4 | 465.5000 | 136.5 PL | FMN | WQON264 |
| Chemung County Fire | Channel 8 Airport/Fire Police | 465.4625 | 136.5 PL | FMN | WQON264 |
| Webbs Mills Fire Department | Webbs Mills Fire Department – Fire Ground | 453.8000 | 074 DPL | FMN | KNBJ908 |
Nearest trunked radio sites
Distances are measured from the center of Pine Valley.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pine Valley?
We do not have a fire dispatch channel listed specifically for Pine Valley. The county-level fire dispatch channels in the same county: Ch. 3 Elmira City Fire 460.5875 MHz, P25, NAC 333; Chemung County Fire 155.2500 MHz, narrow FM, 118.8 PL; Webbs Mills Fire Department 453.2875 MHz, narrow FM, 074 DPL.
What scanner do I need to listen to fire and EMS in Pine Valley?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Pine Valley?
For Pine Valley, start with the Simulcast site of Tompkins County Public Safety. Its control channels are 856.6875, 857.6875, 858.6875, 859.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.