Skip to content

Montour Falls Fire and EMS Frequencies

We do not have frequencies listed specifically for Montour Falls in Schuyler County, New York yet. Countywide channels for Schuyler County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Tompkins County Public Safety), about 21 miles away.

About Montour Falls Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Montour Falls: Schuyler County Fire 155.2500 MHz, narrow FM, 103.5 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 6 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Schuyler County channels that also cover Montour Falls

Fire Dispatch

Fire Dispatch frequencies for Schuyler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Schuyler County FireFire/EMS Paging155.2500103.5 PLFMNWQUC670

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Schuyler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Schuyler County FireFire/EMS 5 Operations/Emergency Management453.4500
In 458.4500
NAC 280P25WPNQ850
Schuyler County FireFire/EMS 4 Operations/Emergency Management453.6250
In 458.6250
NAC 280P25WPNQ850
Schuyler County FireFire/EMS 6 Operations460.1125NAC 280P25WQOM480
Schuyler County FireFire/EMS 3 Operations465.1125NAC 280P25WQOM480

Fire Talk-around

Fire Talk-around frequencies for Schuyler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Academy of Fire ScienceFirefighter Training153.8600FMNWRKH820
Academy of Fire ScienceFirefighter Training154.0250FMNWRKH820
Academy of Fire ScienceFirefighter Training155.5350FMNWRKH820
Schuyler County FireFire/EMS 1 Main460.0875
In 465.0875
NAC 280P25WQOM480
Schuyler County FireFire/EMS 2 Coordination460.2000
In 465.2000
NAC 280P25WQOM480

Nearest trunked radio sites

Distances are measured from the center of Montour Falls.

Simulcast · Tompkins County Public Safety
RFSS 1 · Site 2 (hex 2) · NAC 1E0 · about 21 mi away
Control 856.6875, 857.6875, 858.6875, 859.8875
Voice 854.0125, 854.3125, 854.4875, 854.9375, 855.0125, 855.3125
Ontario South Simulcast · Monroe/Ontario Counties
RFSS 80 · Site 80 (hex 50) · NAC 47F · about 39 mi away
Control 769.25625, 769.78125, 770.08125, 773.93125
Ontario North Simulcast · Monroe/Ontario Counties
RFSS 70 · Site 70 (hex 46) · NAC 47F · about 43 mi away
Control 769.28125, 769.55625, 769.85625, 770.10625, 773.70625, 773.90625, 774.15625, 774.40625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Montour Falls?

We do not have a fire dispatch channel listed specifically for Montour Falls. The county-level fire dispatch channels in the same county: Schuyler County Fire 155.2500 MHz, narrow FM, 103.5 PL.

What scanner do I need to listen to fire and EMS in Montour Falls?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Montour Falls?

For Montour Falls, start with the Simulcast site of Tompkins County Public Safety. Its control channels are 856.6875, 857.6875, 858.6875, 859.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.