Skip to content

Fort Plain Fire and EMS Frequencies

We do not have frequencies listed specifically for Fort Plain in Montgomery County, New York yet. Countywide channels for Montgomery County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rotterdam (Capital Digitronics (Capital District Public Safety)), about 29 miles away.

About Fort Plain Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Fort Plain: Montgomery County Fire 151.0175 MHz, narrow FM, 131 DPL. County-level ems dispatch that covers Fort Plain: Montgomery County EMS 155.1600 MHz, narrow FM, 103.5 PL.

  • 17 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Montgomery County channels that also cover Fort Plain

Fire Dispatch

Fire Dispatch frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montgomery County FireResponse151.0175131 DPLFMNWQWW620
Montgomery County FireMontgomery County Fire – Dispatch154.7325CSQFMNWQWW619

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cranesville FireCranesville Fire – Fire Ground46.3800FMWPBA605
Cranesville FireCranesville Fire – Fire Ground154.1225156.7 PLFMNWPBA605
Montgomery County FireMontgomery County Fire – Fire Ground – East154.1825343 DPLFMNWQXN962
Montgomery County FireWater Supply154.2725412 DPLFMN—
Montgomery County FireHazardous Materials154.2800712 DPLFMN—
Montgomery County FireMontgomery County Fire – Fire Ground – West155.1075152 DPLFMNWQWW619
Montgomery County FireLanding Zone155.7150CSQFMNKNIL522
Montgomery County FireMontgomery County Fire – Fire Ground – Central155.8275445 DPLFMNWQXN962
Montgomery County FireInterior159.0825526 DPLFMNWQXN962

Fire Talk-around

Fire Talk-around frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Amsterdam (Town)Fire Police154.4525212 DPLFMN—
Montgomery County FireFire Police Central151.1000612 DPLFMNWPUB630
Montgomery County FireFire Police West154.1825261 DPLFMNWQXN962
Montgomery County FireCommand155.0925306 DPLFMNWQWW620
Montgomery County FireFire Police East155.1075654 DPLFMNWQWW619

EMS Dispatch

EMS Dispatch frequencies for Montgomery County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Montgomery County EMSMontgomery County EMS – Dispatch155.1600103.5 PLFMNKNIL522

Nearest trunked radio sites

Distances are measured from the center of Fort Plain.

Rotterdam · Capital Digitronics (Capital District Public Safety)
Site 4 (hex 4) · about 29 mi away
Voice 856.5875, 857.5875, 858.5875, 859.5875, 860.5875
Schenectady County Simulcast · Albany/Schenectady Counties
RFSS 1 · Site 4 (hex 4) · NAC 694 · about 30 mi away
Control 851.2875, 851.85, 852.075
Voice 852.35
New Scotland · Capital Digitronics (Capital District Public Safety)
Site 2 (hex 2) · about 38 mi away
Voice 0, 854.1625, 854.7375, 856.3375, 857.3375, 858.3375, 859.3375, 860.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Fort Plain?

We do not have a fire dispatch channel listed specifically for Fort Plain. The county-level fire dispatch channels in the same county: Montgomery County Fire 151.0175 MHz, narrow FM, 131 DPL.

What frequency does EMS or the ambulance service use in Fort Plain?

We do not have a EMS dispatch channel listed specifically for Fort Plain. The county-level EMS dispatch channels in the same county: Montgomery County EMS 155.1600 MHz, narrow FM, 103.5 PL.

What scanner do I need to listen to fire and EMS in Fort Plain?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Fort Plain?

For Fort Plain, start with the Schenectady County Simulcast site of Albany/Schenectady Counties. Its control channels are 851.2875, 851.85, 852.075 MHz. Program a control channel first; the scanner finds the voice channels from it.