Skip to content

Sharon Springs Fire and EMS Frequencies

We do not have frequencies listed specifically for Sharon Springs in Schoharie County, New York yet. Countywide channels for Schoharie County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rotterdam (Capital Digitronics (Capital District Public Safety)), about 28 miles away.

About Sharon Springs Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Sharon Springs: Schoharie County Fire 46.1800 MHz, FM, 151.4 PL. County-level ems dispatch that covers Sharon Springs: Schoharie County EMS 155.2200 MHz, narrow FM, 186.2 PL.

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Schoharie County channels that also cover Sharon Springs

Fire Dispatch

Fire Dispatch frequencies for Schoharie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Schoharie County FireSchoharie County Fire – Dispatch46.1800151.4 PLFMKEF700
Schoharie County FirePaging Simulcast151.0775179.9 PLFMNKEF700

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Schoharie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Schoharie County FireSchoharie County Fire – Fire Ground45.0800151.4 PLFMKEF700
Schoharie County FireFire Interior Operations45.4800151.4 PLFMKEF700
Schoharie County FireSchoharie County Fire – Fire Ground46.2200CSQFMKEF472
Schoharie County FireSchoharie County Fire – Simulcast154.3175
In 159.4125
151.4 PLFMNKEF700
Schoharie County FireSchoharie County Fire – Brown Mtn Repeater154.3925
In 151.4075
151.4 PLFMNWPTW669
Schoharie County FireSchoharie County Fire – Oak Hill Repeater155.5275
In 151.1225
151.4 PLFMNWPUT571

EMS Dispatch

EMS Dispatch frequencies for Schoharie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Schoharie County EMSSchoharie County EMS – Dispatch155.2200186.2 PLFMNKSO959

Nearest trunked radio sites

Distances are measured from the center of Sharon Springs.

Rotterdam · Capital Digitronics (Capital District Public Safety)
Site 4 (hex 4) · about 28 mi away
Voice 856.5875, 857.5875, 858.5875, 859.5875, 860.5875
Schenectady County Simulcast · Albany/Schenectady Counties
RFSS 1 · Site 4 (hex 4) · NAC 694 · about 28 mi away
Control 851.2875, 851.85, 852.075
Voice 852.35
New Scotland · Capital Digitronics (Capital District Public Safety)
Site 2 (hex 2) · about 33 mi away
Voice 0, 854.1625, 854.7375, 856.3375, 857.3375, 858.3375, 859.3375, 860.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sharon Springs?

We do not have a fire dispatch channel listed specifically for Sharon Springs. The county-level fire dispatch channels in the same county: Schoharie County Fire 46.1800 MHz, FM, 151.4 PL.

What frequency does EMS or the ambulance service use in Sharon Springs?

We do not have a EMS dispatch channel listed specifically for Sharon Springs. The county-level EMS dispatch channels in the same county: Schoharie County EMS 155.2200 MHz, narrow FM, 186.2 PL.

What scanner do I need to listen to fire and EMS in Sharon Springs?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sharon Springs?

For Sharon Springs, start with the Schenectady County Simulcast site of Albany/Schenectady Counties. Its control channels are 851.2875, 851.85, 852.075 MHz. Program a control channel first; the scanner finds the voice channels from it.