About Briar Chapel Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Briar Chapel: Chatham County Fire 154.3250 MHz, FM, 186.2 PL. County-level ems dispatch that covers Briar Chapel: Chatham County EMS 155.8350 MHz, FM, 186.2 PL. Trunked: North Carolina VIPER, for example Chatham County Fire talkgroup 10002 (hex 2712).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Briar Chapel, start with the Chatham Mtn site of North Carolina VIPER, about 4 miles away. Its control channels: 853.4125, 853.6875 MHz.
Data updated .
Chatham County channels that also cover Briar Chapel
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chatham County Fire | Chatham County Fire – Dispatch | 154.3250 In 156.0600 | 186.2 PL | FM | KIK944 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chatham County EMS | Chatham County EMS – Dispatch | 155.8350 In 153.9650 | 186.2 PL | FM | KAF508 |
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Chatham County Fire | Chatham FIRE Dispatch | 10002 | 2712 | D |
| Chatham County Fire | Chatham Tactical | 10004 | 2714 | D |
| Chatham County Fire | Chatham Tactical | 10006 | 2716 | D |
| Chatham County Fire | Chatham Tactical | 10007 | 2717 | D |
| Chatham County Fire | Chatham Tactical | 10008 | 2718 | D |
| Chatham County Fire | Chatham Tactical | 10009 | 2719 | D |
| Chatham County Fire | Chatham Tactical | 10010 | 271a | D |
| Chatham County Fire | Chahtam Tactical | 10011 | 271b | D |
| Chatham County Fire | Goldson Fire Department Operations | 10030 | 272e | D |
| Chatham County Fire | Northview Fire Department Operations | 10031 | 272f | D |
| Chatham County Fire | Staley Fire Department Operations | 10033 | 2731 | D |
| Chatham County Fire | North Chatham Fire Department Operations | 10036 | 2734 | D |
| Chatham County EMS | Chatham County EMS – Dispatch | 10001 | 2711 | D |
Nearest trunked radio sites
Distances are measured from the center of Briar Chapel.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Briar Chapel?
We do not have a fire dispatch channel listed specifically for Briar Chapel. The county-level fire dispatch channels in the same county: Chatham County Fire 154.3250 MHz, FM, 186.2 PL.
What frequency does EMS or the ambulance service use in Briar Chapel?
We do not have a EMS dispatch channel listed specifically for Briar Chapel. The county-level EMS dispatch channels in the same county: Chatham County EMS 155.8350 MHz, FM, 186.2 PL.
Do fire departments and EMS use a trunked radio system in Briar Chapel?
Yes. The county-level systems that cover Briar Chapel are Fire and EMS talkgroups are listed for North Carolina VIPER: 13 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Briar Chapel?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Briar Chapel?
For Briar Chapel, start with the Chatham Mtn site of North Carolina VIPER. Its control channels are 853.4125, 853.6875 MHz. Program a control channel first; the scanner finds the voice channels from it.