Skip to content

Carolina Meadows Fire and EMS Frequencies

We do not have frequencies listed specifically for Carolina Meadows in Chatham County, North Carolina yet. Countywide channels for Chatham County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Chapel Hill (North Carolina VIPER), about 4 miles away.

About Carolina Meadows Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Carolina Meadows: Chatham County Fire 154.3250 MHz, FM, 186.2 PL. County-level ems dispatch that covers Carolina Meadows: Chatham County EMS 155.8350 MHz, FM, 186.2 PL. Trunked: North Carolina VIPER, for example Chatham County Fire talkgroup 10002 (hex 2712).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Carolina Meadows, start with the Chapel Hill site of North Carolina VIPER, about 4 miles away. Its control channels: 853.3875, 853.825 MHz.

Data updated .

Chatham County channels that also cover Carolina Meadows

Fire Dispatch

Fire Dispatch frequencies for Chatham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chatham County FireChatham County Fire – Dispatch154.3250
In 156.0600
186.2 PLFMKIK944

EMS Dispatch

EMS Dispatch frequencies for Chatham County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chatham County EMSChatham County EMS – Dispatch155.8350
In 153.9650
186.2 PLFMKAF508

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Chatham County FireChatham FIRE Dispatch100022712D
Chatham County FireChatham Tactical100042714D
Chatham County FireChatham Tactical100062716D
Chatham County FireChatham Tactical100072717D
Chatham County FireChatham Tactical100082718D
Chatham County FireChatham Tactical100092719D
Chatham County FireChatham Tactical10010271aD
Chatham County FireChahtam Tactical10011271bD
Chatham County FireGoldson Fire Department Operations10030272eD
Chatham County FireNorthview Fire Department Operations10031272fD
Chatham County FireStaley Fire Department Operations100332731D
Chatham County FireNorth Chatham Fire Department Operations100362734D
Chatham County EMSChatham County EMS – Dispatch100012711D

Nearest trunked radio sites

Distances are measured from the center of Carolina Meadows.

Chapel Hill · North Carolina VIPER
RFSS 1 · Site 12 (hex C) · NAC 1F2 · about 4 mi away
Control 853.3875, 853.825
Voice 851.075, 851.3875, 851.7125, 852.4875, 852.9875, 856.4375, 857.4375, 858.4375, 858.5125, 859.4375
Chatham Mtn · North Carolina VIPER
RFSS 1 · Site 13 (hex D) · NAC 1F3 · about 8 mi away
Control 853.4125, 853.6875
Voice 851.2375, 851.6625, 852.2125, 857.5375, 858.1125, 859.1125
RTP Bryan Ctr · North Carolina VIPER
RFSS 1 · Site 47 (hex 2F) · NAC 1F0 · about 10 mi away
Control 774.03125, 774.28125
Voice 770.93125, 771.13125, 771.68125, 772.38125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Carolina Meadows?

We do not have a fire dispatch channel listed specifically for Carolina Meadows. The county-level fire dispatch channels in the same county: Chatham County Fire 154.3250 MHz, FM, 186.2 PL.

What frequency does EMS or the ambulance service use in Carolina Meadows?

We do not have a EMS dispatch channel listed specifically for Carolina Meadows. The county-level EMS dispatch channels in the same county: Chatham County EMS 155.8350 MHz, FM, 186.2 PL.

Do fire departments and EMS use a trunked radio system in Carolina Meadows?

Yes. The county-level systems that cover Carolina Meadows are Fire and EMS talkgroups are listed for North Carolina VIPER: 13 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Carolina Meadows?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Carolina Meadows?

For Carolina Meadows, start with the Chapel Hill site of North Carolina VIPER. Its control channels are 853.3875, 853.825 MHz. Program a control channel first; the scanner finds the voice channels from it.