Skip to content

Cape Colony Fire and EMS Frequencies

We do not have frequencies listed specifically for Cape Colony in Chowan County, North Carolina yet. Countywide channels for Chowan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Valhalla (North Carolina VIPER), about 9 miles away.

About Cape Colony Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Cape Colony: Chowan County Fire 154.2200 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Cape Colony: Chowan County EMS 155.7450 MHz, narrow FM, 146.2 PL. Trunked: North Carolina VIPER, for example Chowan County Fire talkgroup 11006 (hex 2afe).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cape Colony, start with the Valhalla site of North Carolina VIPER, about 9 miles away. Its control channels: 852.3625, 853.75 MHz.

Data updated .

Chowan County channels that also cover Cape Colony

Fire Dispatch

Fire Dispatch frequencies for Chowan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chowan County FireChowan County Fire – Dispatch154.2200
In 153.7700
146.2 PLFMNKSZ729

EMS Dispatch

EMS Dispatch frequencies for Chowan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chowan County EMSChowan County EMS – Dispatch (patched to VIPER TG)155.7450
In 153.8750
146.2 PLFMNKTH465

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Chowan County FireChowan County Fire – Dispatch110062afeT
Chowan County FireFire Administration110052afdT
Chowan County EMSChowan County EMS – Dispatch110032afbT
Chowan County EMSEMS Administration110042afcT

Nearest trunked radio sites

Distances are measured from the center of Cape Colony.

Valhalla · North Carolina VIPER
RFSS 3 · Site 66 (hex 42) · NAC 1F6 · about 9 mi away
Control 852.3625, 853.75
Voice 851.1, 851.425, 851.9875, 858.0125
Perquimans Simulcast · North Carolina VIPER
RFSS 3 · Site 27 (hex 1B) · NAC 1F7 · about 16 mi away
Control 773.94375, 774.80625
Voice 769.25625, 769.56875, 770.31875, 770.60625, 771.43125, 772.20625, 772.68125
Columbia · North Carolina VIPER
RFSS 3 · Site 14 (hex E) · NAC 1F0 · about 16 mi away
Control 852.4375, 853.6125
Voice 851.1125, 851.4875, 851.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Cape Colony?

We do not have a fire dispatch channel listed specifically for Cape Colony. The county-level fire dispatch channels in the same county: Chowan County Fire 154.2200 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Cape Colony?

We do not have a EMS dispatch channel listed specifically for Cape Colony. The county-level EMS dispatch channels in the same county: Chowan County EMS 155.7450 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Cape Colony?

Yes. The county-level systems that cover Cape Colony are Fire and EMS talkgroups are listed for North Carolina VIPER: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cape Colony?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cape Colony?

For Cape Colony, start with the Valhalla site of North Carolina VIPER. Its control channels are 852.3625, 853.75 MHz. Program a control channel first; the scanner finds the voice channels from it.