About Pierce Fire and EMS Frequencies
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Barnes County channels that also cover Pierce
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Barnes County Fire | Sanborn Fire | 154.3100 | 114.8 PL | FMN | WPCB418 |
| Barnes County Fire | Wibledon Fire | 154.3550 In 153.8300 | 123.0 PL | FMN | WPCY440 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Barnes County Hospital | Mercy Hospital | 155.2650 | FMN | KSL273 |
Nearest trunked radio sites
Distances are measured from the center of Pierce.
Hannaford · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 22 (hex 16) · NAC A65 · about 12 mi away
Control 853.6625, 853.8875
Voice 853.4375
Ypsilanti · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 80 (hex 50) · NAC A6F · about 30 mi away
Control 852.1125, 852.3375
Voice 851.8375
Jamestown · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 6 (hex 6) · about 31 mi away
Control 853.8125
Voice 853.1375, 853.3625, 853.5875
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What scanner do I need to listen to fire and EMS in Pierce?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Pierce?
For Pierce, start with the Hannaford site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.6625, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.