Skip to content

Corinne Fire and EMS Frequencies

We do not have frequencies listed specifically for Corinne in Stutsman County, North Dakota yet. Countywide channels for Stutsman County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Hannaford (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 15 miles away.

About Corinne Fire and EMS Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Stutsman County channels that also cover Corinne

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Stutsman County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stutsman County FireFire / EMS / County Services154.0550
In 153.7400
192.8 PLFMNWQY310

Nearest trunked radio sites

Distances are measured from the center of Corinne.

Hannaford · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 22 (hex 16) · NAC A65 · about 15 mi away
Control 853.6625, 853.8875
Voice 853.4375
Jamestown · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 6 (hex 6) · about 28 mi away
Control 853.8125
Voice 853.1375, 853.3625, 853.5875
Pettibone · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 68 (hex 44) · about 28 mi away
Control 862.3625
Voice 851.8625, 852.1375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What scanner do I need to listen to fire and EMS in Corinne?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Corinne?

For Corinne, start with the Hannaford site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.6625, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.