Skip to content

Sentinel Fire and EMS Frequencies

We do not have frequencies listed specifically for Sentinel in Golden Valley County, North Dakota yet. Countywide channels for Golden Valley County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Sentinel Butte (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 6 miles away.

About Sentinel Fire and EMS Frequencies

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Golden Valley County channels that also cover Sentinel

EMS Tactical

EMS Tactical frequencies for Golden Valley County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Golden Valley County EMSCommunity Ambulance Service155.4000FMNKC7254

Nearest trunked radio sites

Distances are measured from the center of Sentinel.

Sentinel Butte · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 7 (hex 7) · NAC A66 · about 6 mi away
Control 853.5375, 853.7625
Voice 853.3125
Beach · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 70 (hex 46) · NAC A64 · about 7 mi away
Control 852.4625
Voice 851.9625, 852.2375
Medora · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 144 (hex 90) · NAC A60 · about 22 mi away
Control 859.9875
Voice 857.9875, 858.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What scanner do I need to listen to fire and EMS in Sentinel?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sentinel?

For Sentinel, start with the Sentinel Butte site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.5375, 853.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.