Skip to content

Belfield Fire and EMS Frequencies

We do not have frequencies listed specifically for Belfield in Stark County, North Dakota yet. Countywide channels for Stark County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Medora (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 14 miles away.

About Belfield Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Belfield: Stark County Fire 154.4150 MHz, narrow FM, CSQ. Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Stark County Fire talkgroup 45207 (hex b097).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 15 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Belfield, start with the Medora site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20), about 14 miles away. Its control channels: 859.9875 MHz.

Data updated .

Stark County channels that also cover Belfield

Fire Dispatch

Fire Dispatch frequencies for Stark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stark County FireCounty Fire154.4150
In 154.0100
CSQFMNKNIT775

North Dakota Statewide Interoperable Radio Network (SIRN 20/20)

North Dakota Statewide Interoperable Radio Network (SIRN 20/20) talkgroups
AgencyDescriptionTalkgroupHexMode
Stark County FireCounty Fire/EMS Main45207b097T
Stark County FireCounty Fire/EMS Operations45208b098T
Stark County FireCounty Fire/EMS Operations45209b099T
Stark County FireCounty Fire/EMS Operations45210b09aT
Stark County FireCounty Fire/EMS Operations45211b09bT
Stark County FireCounty Fire/EMS Operations45212b09cT
Stark County FireCounty Fire/EMS Operations45213b09dT
Stark County FireCounty Fire/EMS Operations45214b09eT
Stark County FireDickinson Rural Fire Department45217b0a1T
Stark County EMSCounty EMS Main45302b0f6T
Stark County- City of DickinsonDickinson Metro Ambulance Main45301b0f5T
Stark County- City of DickinsonSanford Airmed Dickinson Dispatch45803b2ebD
Stark County EMSCounty EMS Operations45303b0f7T
Stark County EMSCounty EMS Operations45304b0f8T
Stark County HospitalCHI St Alexius Health ER Dickinson45801b2e9T

Nearest trunked radio sites

Distances are measured from the center of Belfield.

Medora · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 144 (hex 90) · NAC A60 · about 14 mi away
Control 859.9875
Voice 857.9875, 858.9875
Belfield · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 74 (hex 4A) · NAC A64 · about 14 mi away
Control 852.1375, 852.3625
Voice 851.8625
Dickinson Metro Simulcast · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 5 (hex 5) · NAC A64 · about 19 mi away
Control 853.6375, 853.8625
Voice 853.1875, 853.4125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Belfield?

We do not have a fire dispatch channel listed specifically for Belfield. The county-level fire dispatch channels in the same county: Stark County Fire 154.4150 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Belfield?

Yes. The county-level systems that cover Belfield are Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 15 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Belfield?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Belfield?

For Belfield, start with the Medora site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 859.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.