About Normal Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Normal: McHenry County Fire 154.1900 MHz, narrow FM, CSQ.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
McHenry County channels that also cover Normal
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McHenry County Fire | Velva Fire | 154.1900 | CSQ | FMN | KLC995 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McHenry County Fire | Anamoose Fire | 155.9400 | CSQ | FMN | WNMG792 |
Nearest trunked radio sites
Distances are measured from the center of Normal.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Normal?
We do not have a fire dispatch channel listed specifically for Normal. The county-level fire dispatch channels in the same county: McHenry County Fire 154.1900 MHz, narrow FM, CSQ.
What scanner do I need to listen to fire and EMS in Normal?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Normal?
For Normal, start with the Towner site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.