About South Valley Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers South Valley: Rolette County Fire 151.3550 MHz, P25, NAC 788.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Rolette County channels that also cover South Valley
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rolette County Fire | County Fire/EMS Dispatch | 151.3550 In 159.3525 | NAC 788 | P25 | KDU569 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rolette County Fire | St. John Fire Department | 154.3850 | FMN | WNGG729 |
Nearest trunked radio sites
Distances are measured from the center of South Valley.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in South Valley?
We do not have a fire dispatch channel listed specifically for South Valley. The county-level fire dispatch channels in the same county: Rolette County Fire 151.3550 MHz, P25, NAC 788.
What scanner do I need to listen to fire and EMS in South Valley?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in South Valley?
For South Valley, start with the Belcourt site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 852.1125, 852.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.