About Egan Fire and EMS Frequencies
Quick answer: Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Mountrail County Fire talkgroup 31203 (hex 79e3).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Egan, start with the Stanley site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20), about 18 miles away. Its control channels: 853.8625 MHz.
Data updated .
Mountrail County channels that also cover Egan
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mountrail County Hospital | Mountrial County Medical Center | 155.3850 | FMN | WPMN242 | |
| Mountrail County Hospital | Mountrial County Medical Center | 163.2500 | FMN | WPMN242 |
North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Mountrail County Fire | County Fire/EMS Main | 31203 | 79e3 | T |
| Mountrail County Fire | County Fire/EMS Operations | 31204 | 79e4 | T |
| Mountrail County Fire | County Fire/EMS Operations | 31205 | 79e5 | T |
| Mountrail County Fire | County Fire/EMS Operations | 31206 | 79e6 | T |
| Mountrail County Fire | County Fire/EMS Operations | 31207 | 79e7 | T |
| Mountrail County EMS | County EMS Operations | 31301 | 7a45 | T |
| Mountrail County EMS | County EMS Operations | 31302 | 7a46 | T |
Nearest trunked radio sites
Distances are measured from the center of Egan.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Egan?
Yes. The county-level systems that cover Egan are Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Egan?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Egan?
For Egan, start with the Stanley site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.8625 MHz. Program a control channel first; the scanner finds the voice channels from it.