About Stave Fire and EMS Frequencies
Quick answer: Trunked: North Dakota Statewide Interoperable Radio Network (SIRN 20/20), for example Mountrail County Fire talkgroup 31203 (hex 79e3).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Stave, start with the Parshall site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20), about 19 miles away. Its control channels: 853.9125 MHz.
Data updated .
Mountrail County channels that also cover Stave
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mountrail County Hospital | Mountrial County Medical Center | 155.3850 | FMN | WPMN242 | |
| Mountrail County Hospital | Mountrial County Medical Center | 163.2500 | FMN | WPMN242 |
North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Mountrail County Fire | County Fire/EMS Main | 31203 | 79e3 | T |
| Mountrail County Fire | County Fire/EMS Operations | 31204 | 79e4 | T |
| Mountrail County Fire | County Fire/EMS Operations | 31205 | 79e5 | T |
| Mountrail County Fire | County Fire/EMS Operations | 31206 | 79e6 | T |
| Mountrail County Fire | County Fire/EMS Operations | 31207 | 79e7 | T |
| Mountrail County EMS | County EMS Operations | 31301 | 7a45 | T |
| Mountrail County EMS | County EMS Operations | 31302 | 7a46 | T |
Nearest trunked radio sites
Distances are measured from the center of Stave.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Stave?
Yes. The county-level systems that cover Stave are Fire and EMS talkgroups are listed for North Dakota Statewide Interoperable Radio Network (SIRN 20/20): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Stave?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Stave?
For Stave, start with the Parshall site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.