Skip to content

Nash Fire and EMS Frequencies

We do not have frequencies listed specifically for Nash in Nelson County, North Dakota yet. Countywide channels for Nelson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Petersburg (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 4 miles away.

About Nash Fire and EMS Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Nelson County channels that also cover Nash

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Nelson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Nelson County FireAneta Fire154.3400
In 150.7900
141.3 PLFMNWPMY691
Nelson County FireMcVille Fire154.4300
In 154.7700
FMNWNUR831

Nearest trunked radio sites

Distances are measured from the center of Nash.

Petersburg · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 35 (hex 23) · NAC A62 · about 4 mi away
Control 851.9625, 852.4625
Voice 851.7375
Lakota · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 64 (hex 40) · about 14 mi away
Control 853.8125
Voice 853.3625, 853.5875
Fordville · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 111 (hex 6F) · about 24 mi away
Control 853.7875
Voice 853.3375, 853.5625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What scanner do I need to listen to fire and EMS in Nash?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Nash?

For Nash, start with the Petersburg site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 851.9625, 852.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.