Skip to content

Williams Fire and EMS Frequencies

We do not have frequencies listed specifically for Williams in Nelson County, North Dakota yet. Countywide channels for Nelson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lakota (North Dakota Statewide Interoperable Radio Network (SIRN 20/20)), about 3 miles away.

About Williams Fire and EMS Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Nelson County channels that also cover Williams

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Nelson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Nelson County FireAneta Fire154.3400
In 150.7900
141.3 PLFMNWPMY691
Nelson County FireMcVille Fire154.4300
In 154.7700
FMNWNUR831

Nearest trunked radio sites

Distances are measured from the center of Williams.

Lakota · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 64 (hex 40) · about 3 mi away
Control 853.8125
Voice 853.3625, 853.5875
Petersburg · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 35 (hex 23) · NAC A62 · about 12 mi away
Control 851.9625, 852.4625
Voice 851.7375
Colvin · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 60 (hex 3C) · NAC A6B · about 29 mi away
Control 852.1625, 852.3875
Voice 851.8875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What scanner do I need to listen to fire and EMS in Williams?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Williams?

For Williams, start with the Lakota site of North Dakota Statewide Interoperable Radio Network (SIRN 20/20). Its control channels are 853.8125 MHz. Program a control channel first; the scanner finds the voice channels from it.