Skip to content

Montville Fire and EMS Frequencies

Montville in Geauga County, Ohio has 0 conventional frequencies and 3 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Geauga County Simulcast (Ohio MARCS-IP: Multi-Agency Radio Communications), about 9 miles away.

About Montville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Montville: Fire Dispatch 460.4375 MHz, narrow FM, 114.8 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Geauga County Fire/EMS/Hospital talkgroup 19521 (hex 4c41).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups; Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Montville, start with the Geauga County Simulcast site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 9 miles away. Its control channels: 855.2125, 856.0375, 860.7875 MHz.

Data updated .

Montville trunked talkgroups

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Geauga County Fire/EMS/HospitalHambden / Montville / Thompson Fire Dispatch195214c41D
Montville FireMontville Fire A195884c84D
Montville FireMontville Fire B195894c85D

Geauga County channels that also cover Montville

Fire Dispatch

Fire Dispatch frequencies for Geauga County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire DispatchCounty Fire Alerting460.4375114.8 PLFMNWQYP610

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Geauga County Fire/EMS/HospitalGeauga Co Fire Investigative Unit196074c97D
Geauga County Fire/EMS/HospitalGeauga Medical Center ER195304c4aD
Geauga County Fire/EMS/HospitalUH Geauga Medical Center59759e96fD

Nearest trunked radio sites

Distances are measured from the center of Montville.

Geauga County Simulcast · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 10 (hex A) · NAC 34A · about 9 mi away
Control 855.2125, 856.0375, 860.7875, 860.9125
Voice 854.0125, 854.2125, 855.0125, 855.5375, 856.1125, 861.4625, 861.9125
Lake County Simulcast · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 3 (hex 3) · NAC 343 · about 12 mi away
Control 855.8625, 860.7625, 860.8125, 860.8625
Voice 851.925, 852.2625, 852.575, 853.0375, 853.7625, 854.4125, 854.4375, 854.4625, 854.6625, 854.8875, 854.9875, 855.4125, 855.4375, 855.4625, 855.7875, 855.9375, 856.2125, 856.2375
Geneva · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 8 (hex 8) · NAC 347 · about 16 mi away
Control 772.33125, 773.55625
Voice 769.15625, 769.90625, 771.03125, 771.40625, 851.8125, 856.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Montville?

We do not have a fire dispatch channel listed specifically for Montville. The county-level fire dispatch channels in the same county: Fire Dispatch 460.4375 MHz, narrow FM, 114.8 PL.

Do fire departments and EMS use a trunked radio system in Montville?

Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Montville?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Montville?

For Montville, start with the Geauga County Simulcast site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 855.2125, 856.0375, 860.7875, 860.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Montville fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Montville are marked encrypted.