About Thompson Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Thompson: Fire Dispatch 460.4375 MHz, narrow FM, 114.8 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Geauga County Fire/EMS/Hospital talkgroup 19521 (hex 4c41).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups; Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Thompson, start with the Lake County Simulcast site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 10 miles away. Its control channels: 855.8625, 860.7625, 860.8125 MHz.
Data updated .
Thompson trunked talkgroups
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Geauga County Fire/EMS/Hospital | Hambden / Montville / Thompson Fire Dispatch | 19521 | 4c41 | D |
| Thompson Fire | Thompson Fire A | 19586 | 4c82 | D |
| Thompson Fire | Thompson Fire B | 19587 | 4c83 | D |
Geauga County channels that also cover Thompson
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire Dispatch | County Fire Alerting | 460.4375 | 114.8 PL | FMN | WQYP610 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Geauga County Fire/EMS/Hospital | Geauga Co Fire Investigative Unit | 19607 | 4c97 | D |
| Geauga County Fire/EMS/Hospital | Geauga Medical Center ER | 19530 | 4c4a | D |
| Geauga County Fire/EMS/Hospital | UH Geauga Medical Center | 59759 | e96f | D |
Nearest trunked radio sites
Distances are measured from the center of Thompson.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Thompson?
We do not have a fire dispatch channel listed specifically for Thompson. The county-level fire dispatch channels in the same county: Fire Dispatch 460.4375 MHz, narrow FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Thompson?
Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Thompson?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Thompson?
For Thompson, start with the Lake County Simulcast site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 855.8625, 860.7625, 860.8125, 860.8625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Thompson fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Thompson are marked encrypted.