About Pleasant Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Pleasant: County Fire Dispatch 154.3550 MHz, narrow FM, 306 DPL; County Fire/EMS Paging 155.5800 MHz, narrow FM, 306 DPL. County-level ems dispatch that covers Pleasant: EMS Agencies 151.1675 MHz, narrow FM, 516 DPL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Logan County Fire talkgroup 29011 (hex 7153).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pleasant, start with the Bellefontaine site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 12 miles away. Its control channels: 772.55625, 773.15625 MHz.
Data updated .
Logan County channels that also cover Pleasant
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire Dispatch | County Fire Dispatch | 154.3550 In 151.2125 | 306 DPL | FMN | WSW629 |
| County Fire/EMS Paging | County Fire/EMS Paging | 155.5800 In 151.2800 | 306 DPL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | Robinaugh Emergency Medical Services | 151.1675 In 159.2775 | 516 DPL | FMN | KKR602 |
| EMS Agencies | Indian Lake EMS | 155.2950 | 306 DPL | FMN | WPCG675 |
| EMS Agencies | Logan County EMS | 155.2950 | FMN | WNKN439 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Logan County Fire | Fire/EMS Paging | 29011 | 7153 | D |
| Logan County Fire | Fire Operations | 29003 | 714b | D |
| Logan County Fire | Fire Operations | 29006 | 714e | D |
| Logan County Fire | Fire Operations | 29012 | 7154 | D |
| Logan County Fire | Fire Operations | 29013 | 7155 | D |
| Logan County EMS | Robinaugh EMS | 29025 | 7161 | D |
| Logan County EMS | EMS Operations | 29017 | 7159 | D |
Nearest trunked radio sites
Distances are measured from the center of Pleasant.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pleasant?
We do not have a fire dispatch channel listed specifically for Pleasant. The county-level fire dispatch channels in the same county: County Fire Dispatch 154.3550 MHz, narrow FM, 306 DPL; County Fire/EMS Paging 155.5800 MHz, narrow FM, 306 DPL.
What frequency does EMS or the ambulance service use in Pleasant?
We do not have a EMS dispatch channel listed specifically for Pleasant. The county-level EMS dispatch channels in the same county: EMS Agencies 151.1675 MHz, narrow FM, 516 DPL.
Do fire departments and EMS use a trunked radio system in Pleasant?
Yes. The county-level systems that cover Pleasant are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pleasant?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pleasant?
For Pleasant, start with the Bellefontaine site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 772.55625, 773.15625 MHz. Program a control channel first; the scanner finds the voice channels from it.