Skip to content

Perry Fire and EMS Frequencies

We do not have frequencies listed specifically for Perry in Shelby County, Ohio yet. Countywide channels for Shelby County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Sidney (Ohio MARCS-IP: Multi-Agency Radio Communications), about 5 miles away.

About Perry Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Perry: County Fire Dispatch 154.4150 MHz, narrow FM, 141.3 PL; County Fire/EMS Paging 155.2200 MHz, narrow FM, 263 DPL. County-level ems dispatch that covers Perry: County EMS Dispatch 151.3175 MHz, narrow FM, 141.3 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Shelby County Fire talkgroup 44504 (hex add8).

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (TELM), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups; Shelby County (OH) P25 (Project 25): 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Perry, start with the Sidney site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 5 miles away. Its control channels: 773.78125, 774.53125 MHz.

Data updated .

Shelby County channels that also cover Perry

Fire Dispatch

Fire Dispatch frequencies for Shelby County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire DispatchCounty Fire Dispatch154.4150
In 154.0100
141.3 PLFMNKKW240
County Fire/EMS PagingCounty Fire/EMS Paging155.2200263 DPLFMNKNBB774

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Shelby County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire TACCounty Fire Tactical155.7150431 DPLFMNWZJ435
County Fire Tac 14County Fire Tactical154.6000FMNNONE
Shelby County FireSidney Tornado Alert Siren Tones465.0875TELMWPGR576

Fire Talk-around

Fire Talk-around frequencies for Shelby County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ft. Loramie FireFt. Loramie Fire159.1350141.3 PLFMNWYK427
Shelby County FireFireground "Statewide"154.2650141.3 PLFMNKKW240
Shelby County FireFireground "Statewide"154.2950141.3 PLFMNKKW240

EMS Dispatch

EMS Dispatch frequencies for Shelby County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County EMS DispatchCounty EMS Dispatch151.3175
In 159.1725
141.3 PLFMNKNBB774

EMS Tactical

EMS Tactical frequencies for Shelby County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County EMS TAC 1County EMS Tactical154.2050141.3 PLFMN—

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Shelby County FireCounty Fire Dispatch44504add8D
Shelby County FireFire/EMS Paging44510addeD
Shelby County FireCounty Fire Operations44506addaD
Shelby County EMSCounty EMS Dispatch44507addbD

Shelby County (OH) P25

Project 25

Shelby County (OH) P25 talkgroups
AgencyDescriptionTalkgroupHexMode
Fire/EMS/HospitalCounty Fire/EMS Paging10165D
Fire/EMS/HospitalCounty Fire Dispatch1096dD
Fire/EMS/HospitalCounty Fire Tactical1106eD
Fire/EMS/HospitalCounty Fire Tactical1116fD
Fire/EMS/HospitalCounty EMS Patch to Logan County11371D
Fire/EMS/HospitalHouston Fire Tactical180b4D
Fire/EMS/HospitalMaplewood Fire Tactical196c4D
Fire/EMS/HospitalFire/EMS/Hospital – Dispatch11270D
Fire/EMS/HospitalCounty EMS Tactical13587D
Fire/EMS/HospitalCounty EMS Tactical13789D

Nearest trunked radio sites

Distances are measured from the center of Perry.

Sidney · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 1 · Site 19 (hex 13) · NAC 34C · about 5 mi away
Control 773.78125, 774.53125
Voice 772.15625, 773.28125, 773.45625, 851.65, 852.6, 853.125
Shelby County Simulcast · Shelby County (OH) P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC BD1 · about 8 mi away
Control 771.91875, 774.49375
Voice 769.56875, 769.86875, 770.79375, 771.26875
Miami County Simulcast · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 4 · Site 5 (hex 5) · NAC 345 · about 19 mi away
Control 856.7375, 857.7375, 858.7375, 859.7375
Voice 851.3375, 852.8375, 853.3, 854.4125, 856.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Perry?

We do not have a fire dispatch channel listed specifically for Perry. The county-level fire dispatch channels in the same county: County Fire Dispatch 154.4150 MHz, narrow FM, 141.3 PL; County Fire/EMS Paging 155.2200 MHz, narrow FM, 263 DPL.

What frequency does EMS or the ambulance service use in Perry?

We do not have a EMS dispatch channel listed specifically for Perry. The county-level EMS dispatch channels in the same county: County EMS Dispatch 151.3175 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Perry?

Yes. The county-level systems that cover Perry are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups; Shelby County (OH) P25 (Project 25): 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Perry?

The analog conventional channels can be heard on any scanner; a scanner that decodes TELM is needed for the digital conventional channels; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Perry?

For Perry, start with the Sidney site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 773.78125, 774.53125 MHz. Program a control channel first; the scanner finds the voice channels from it.