About Pebble Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Pebble: Pike County Fire Dispatch 154.8525 MHz, FM, 103.5 PL. County-level ems dispatch that covers Pebble: EMS Agencies 155.5575 MHz, FM, 85.4 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Pike County Fire talkgroup 40004 (hex 9c44).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pebble, start with the Latham (Bainbridge) site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 6 miles away. Its control channels: 769.93125, 773.95625 MHz.
Data updated .
Pike County channels that also cover Pebble
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Fire Dispatch | Pike County Fire Dispatch | 154.8525 In 159.2625 | 103.5 PL | FM | WQBT852 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Fire Tac | Pike County Fire Tactical | 154.4300 | 131.8 PL | FM | WNAP579 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pebble Twp Fire admin | Pebble Twp Fire admin | 154.2200 | FM | WPVX387 | |
| Piketon-Seal Twp Fire admin | Piketon-Seal Twp Fire admin | 154.3700 | FM | KNCJ894 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | Pike County EMS Dispatch/Operations | 155.5575 In 151.3775 | 85.4 PL | FM | WQBT852 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | Pike County EMS tac | 155.2050 | 77.0 PL | FM | WPVN615 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pike County Fire | Pike County Fire – Dispatch | 40004 | 9c44 | D |
| Pike County Fire | Fire Paging | 40036 | 9c64 | D |
| Pike County Fire | Pike County Fire – Fire Ground | 40025 | 9c59 | D |
| Pike County EMS | Pike County EMS – Dispatch | 40019 | 9c53 | D |
| Pike County Hospital | Adena Pike Hospital | 59923 | ea13 | D |
Nearest trunked radio sites
Distances are measured from the center of Pebble.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pebble?
We do not have a fire dispatch channel listed specifically for Pebble. The county-level fire dispatch channels in the same county: Pike County Fire Dispatch 154.8525 MHz, FM, 103.5 PL.
What frequency does EMS or the ambulance service use in Pebble?
We do not have a EMS dispatch channel listed specifically for Pebble. The county-level EMS dispatch channels in the same county: EMS Agencies 155.5575 MHz, FM, 85.4 PL.
Do fire departments and EMS use a trunked radio system in Pebble?
Yes. The county-level systems that cover Pebble are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pebble?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pebble?
For Pebble, start with the Latham (Bainbridge) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 769.93125, 773.95625 MHz. Program a control channel first; the scanner finds the voice channels from it.