Skip to content

Bath Fire and EMS Frequencies

We do not have frequencies listed specifically for Bath in Summit County, Ohio yet. Countywide channels for Summit County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Primary (South Summit County), about 7 miles away.

About Bath Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Bath: Low-band FD Paging Fire 33.8600 MHz, FM, CSQ; Summit County Fire 154.3700 MHz, FM, 141.3 PL. County-level ems dispatch that covers Bath: EMS Agencies 153.4850 MHz, NXDN48, RAN 27. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Summit County Hospitals talkgroup 59860 (hex e9d4).

  • 18 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Bath, start with the Primary site of South Summit County, about 7 miles away. Its control channels: 853.2125, 854.0625, 855.0625 MHz.

Data updated .

Summit County channels that also cover Bath

Fire Dispatch

Fire Dispatch frequencies for Summit County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Low-band FD Paging FireLow-band Fire Department Paging (various)33.8600CSQFM—
Summit County FireBarberton Dispatch Alert Tones Only154.3700141.3 PLFM—
Summit County FireStow Dispatch154.3700
In 150.8050
110.9 PLFMKQD794
Summit County FireMunroe Falls Dispatch – Pagers Only158.8350FM—
Summit County FireNorthfield Village Dispatch423.0250
In 428.0250
243 DPLFMNWQJY508
Summit County FireNorthfield Center / Sagamore Hills Fire District 27 Dispatch423.7500
In 428.7500
110.9 PLFMWNPV782
Summit County FireTwinsburg/Reminderville Dispatch423.8250
In 428.8250
114.8 PLFMKAZ311
Summit County FireMacedonia Dispatch423.9500
In 428.9500
110.9 PLFMWNNO318
Summit County FireHudson Dispatch424.2750
In 429.2750
136.5 PLFMWPKF647

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Summit County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Macedonia Fireground Ch 3Macedonia Fireground425.2750FM—
Summit County FireTallmadge/Mogadore/Munroe Falls Fireground Backup System153.8300CSQFM—
Summit County FireNorton Operations155.8500173.8 PLFMKDR481
Summit County FireMacedonia Channel 6/Police Department Common424.2500
In 429.2500
110.9 PLFMWNNI883
Summit County FireAkron Talk-Around855.3625167.9 PLFMWNJX383

Fire Talk-around

Fire Talk-around frequencies for Summit County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Law Enforcement FireMacedonia Channel 6/Fire Common424.2500
In 429.2500
110.9 PLFMNWNNI883

EMS Dispatch

EMS Dispatch frequencies for Summit County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMS AgenciesAmerican Medical Response (AMR) – Summit County Operations153.4850
In 159.9600
RAN 27NXDN48WPMU321
EMS AgenciesSummit Transport Systems – Operations155.265094.8 PLFMWQAN470
EMS AgenciesHudson EMS – Dispatch/Operations423.2250
In 428.2250
136.5 PLFMWPKF647

EMS Talk-around

EMS Talk-around frequencies for Summit County
AgencyDescriptionFrequency (MHz)ToneModeFCC
EMS AgenciesHudson EMS423.5500
In 428.5500
FMWPKF647

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Summit County HospitalsSumma Health – Barberton Campus59860e9d4D

Nearest trunked radio sites

Distances are measured from the center of Bath.

Primary · South Summit County
Site 1 (hex 1) · about 7 mi away
Control 853.2125, 854.0625, 855.0625, 855.3875
Voice 852.0375
Summit County Simulcast · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 2 (hex 2) · NAC 34A · about 7 mi away
Control 857.2625, 857.6625, 858.5125, 858.7125
Voice 851.0375, 851.25, 851.2875, 851.5625, 851.8, 853.65, 853.9125, 854.3125, 854.3625, 854.4875, 854.5125, 855.0875, 855.2625, 855.3125, 855.5125, 856.0125, 856.6375, 856.6875, 857.1375, 857.1875, 857.9625
Medina (Seville) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 54 (hex 36) · NAC 345 · about 13 mi away
Control 774.08125, 774.58125
Voice 769.93125, 772.73125, 773.13125, 773.63125, 852.125, 852.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bath?

We do not have a fire dispatch channel listed specifically for Bath. The county-level fire dispatch channels in the same county: Low-band FD Paging Fire 33.8600 MHz, FM, CSQ; Summit County Fire 154.3700 MHz, FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Bath?

We do not have a EMS dispatch channel listed specifically for Bath. The county-level EMS dispatch channels in the same county: EMS Agencies 153.4850 MHz, NXDN48, RAN 27.

Do fire departments and EMS use a trunked radio system in Bath?

Yes. The county-level systems that cover Bath are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Bath?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Bath?

For Bath, start with the Primary site of South Summit County. Its control channels are 853.2125, 854.0625, 855.0625, 855.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.