About Montrose-Ghent Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Montrose-Ghent: Low-band FD Paging Fire 33.8600 MHz, FM, CSQ; Summit County Fire 154.3700 MHz, FM, 141.3 PL. County-level ems dispatch that covers Montrose-Ghent: EMS Agencies 153.4850 MHz, NXDN48, RAN 27. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Summit County Hospitals talkgroup 59860 (hex e9d4).
- 18 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Montrose-Ghent, start with the Primary site of South Summit County, about 7 miles away. Its control channels: 853.2125, 854.0625, 855.0625 MHz.
Data updated .
Summit County channels that also cover Montrose-Ghent
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Low-band FD Paging Fire | Low-band Fire Department Paging (various) | 33.8600 | CSQ | FM | — |
| Summit County Fire | Barberton Dispatch Alert Tones Only | 154.3700 | 141.3 PL | FM | — |
| Summit County Fire | Stow Dispatch | 154.3700 In 150.8050 | 110.9 PL | FM | KQD794 |
| Summit County Fire | Munroe Falls Dispatch – Pagers Only | 158.8350 | FM | — | |
| Summit County Fire | Northfield Village Dispatch | 423.0250 In 428.0250 | 243 DPL | FMN | WQJY508 |
| Summit County Fire | Northfield Center / Sagamore Hills Fire District 27 Dispatch | 423.7500 In 428.7500 | 110.9 PL | FM | WNPV782 |
| Summit County Fire | Twinsburg/Reminderville Dispatch | 423.8250 In 428.8250 | 114.8 PL | FM | KAZ311 |
| Summit County Fire | Macedonia Dispatch | 423.9500 In 428.9500 | 110.9 PL | FM | WNNO318 |
| Summit County Fire | Hudson Dispatch | 424.2750 In 429.2750 | 136.5 PL | FM | WPKF647 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Macedonia Fireground Ch 3 | Macedonia Fireground | 425.2750 | FM | — | |
| Summit County Fire | Tallmadge/Mogadore/Munroe Falls Fireground Backup System | 153.8300 | CSQ | FM | — |
| Summit County Fire | Norton Operations | 155.8500 | 173.8 PL | FM | KDR481 |
| Summit County Fire | Macedonia Channel 6/Police Department Common | 424.2500 In 429.2500 | 110.9 PL | FM | WNNI883 |
| Summit County Fire | Akron Talk-Around | 855.3625 | 167.9 PL | FM | WNJX383 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Law Enforcement Fire | Macedonia Channel 6/Fire Common | 424.2500 In 429.2500 | 110.9 PL | FMN | WNNI883 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | American Medical Response (AMR) – Summit County Operations | 153.4850 In 159.9600 | RAN 27 | NXDN48 | WPMU321 |
| EMS Agencies | Summit Transport Systems – Operations | 155.2650 | 94.8 PL | FM | WQAN470 |
| EMS Agencies | Hudson EMS – Dispatch/Operations | 423.2250 In 428.2250 | 136.5 PL | FM | WPKF647 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | Hudson EMS | 423.5500 In 428.5500 | FM | WPKF647 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Summit County Hospitals | Summa Health – Barberton Campus | 59860 | e9d4 | D |
Nearest trunked radio sites
Distances are measured from the center of Montrose-Ghent.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Montrose-Ghent?
We do not have a fire dispatch channel listed specifically for Montrose-Ghent. The county-level fire dispatch channels in the same county: Low-band FD Paging Fire 33.8600 MHz, FM, CSQ; Summit County Fire 154.3700 MHz, FM, 141.3 PL.
What frequency does EMS or the ambulance service use in Montrose-Ghent?
We do not have a EMS dispatch channel listed specifically for Montrose-Ghent. The county-level EMS dispatch channels in the same county: EMS Agencies 153.4850 MHz, NXDN48, RAN 27.
Do fire departments and EMS use a trunked radio system in Montrose-Ghent?
Yes. The county-level systems that cover Montrose-Ghent are Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Montrose-Ghent?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Montrose-Ghent?
For Montrose-Ghent, start with the Primary site of South Summit County. Its control channels are 853.2125, 854.0625, 855.0625, 855.3875 MHz. Program a control channel first; the scanner finds the voice channels from it.