About Sand Point Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Sand Point: Bryan County Fire 151.2725 MHz, P25, NAC 122. County-level ems dispatch that covers Sand Point: Air Evac Medical Helicopter 151.5050 MHz, narrow FM, no tone.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Bryan County channels that also cover Sand Point
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bryan County Fire | Main Fire Dispatch | 151.2725 In 156.0475 | NAC 122 | P25 | WQVF211 |
| Bryan County Fire | West Bryan County Fire – East side of Lake Texoma | 154.2200 | FMN | WPDP820 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Air Evac Medical Helicopter | Durant Tower | 151.5050 In 158.4000 | FMN | — | |
| Air Evac Medical Helicopter | Air Evac – Sherman, TX Base | 152.4275 In 157.6875 | 162.2 PL | FMN | WRDH998 |
Nearest trunked radio sites
Distances are measured from the center of Sand Point.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Sand Point?
We do not have a fire dispatch channel listed specifically for Sand Point. The county-level fire dispatch channels in the same county: Bryan County Fire 151.2725 MHz, P25, NAC 122.
What frequency does EMS or the ambulance service use in Sand Point?
We do not have a EMS dispatch channel listed specifically for Sand Point. The county-level EMS dispatch channels in the same county: Air Evac Medical Helicopter 151.5050 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Sand Point?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Sand Point?
For Sand Point, start with the Tishomingo site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.9375, 860.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.