About Little City Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Little City: Buncombe Creek Fire 151.3175 MHz, narrow FM, 114 DPL; Marshall County Fire 154.3700 MHz, narrow FM, 173.8 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Marshall County channels that also cover Little City
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Buncombe Creek Fire | Buncombe Creek Fire – Dispatch | 151.3175 In 158.7975 | 114 DPL | FMN | WQTP376 |
| Marshall County Fire | Fire and EMS Low Band Tactical | 154.3700 In 150.8050 | 173.8 PL | FMN | WPLT275 |
Nearest trunked radio sites
Distances are measured from the center of Little City.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Little City?
We do not have a fire dispatch channel listed specifically for Little City. The county-level fire dispatch channels in the same county: Buncombe Creek Fire 151.3175 MHz, narrow FM, 114 DPL; Marshall County Fire 154.3700 MHz, narrow FM, 173.8 PL.
What scanner do I need to listen to fire and EMS in Little City?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Little City?
For Little City, start with the Tishomingo site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.9375, 860.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.