About Crescent Springs Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Crescent Springs: Logan County Fire 155.8650 MHz, narrow FM, 94.8 PL. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Logan County Fire talkgroup 197 (hex c5).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Crescent Springs, start with the Guthrie site of Oklahoma Wireless Interoperability Network (OKWIN) (P25), about 13 miles away. Its control channels: 859.2375, 860.2375 MHz.
Data updated .
Logan County channels that also cover Crescent Springs
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Logan County Fire | County Fire Dispatch | 155.8650 In 153.7850 | 94.8 PL | FMN | KNEM454 |
Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Logan County Fire | County Fire Dispatch | 197 | c5 | D |
| Logan County Fire | County Fire – Fireground | 1387 | 56b | D |
| Logan County Fire | County Fire – Fireground | 1389 | 56d | D |
| Logan County Fire | County Fire – Fireground | 3267 | cc3 | D |
Nearest trunked radio sites
Distances are measured from the center of Crescent Springs.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Crescent Springs?
We do not have a fire dispatch channel listed specifically for Crescent Springs. The county-level fire dispatch channels in the same county: Logan County Fire 155.8650 MHz, narrow FM, 94.8 PL.
Do fire departments and EMS use a trunked radio system in Crescent Springs?
Yes. The county-level systems that cover Crescent Springs are Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Crescent Springs?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Crescent Springs?
For Crescent Springs, start with the Guthrie site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2375, 860.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.