Skip to content

Lovell Fire and EMS Frequencies

We do not have frequencies listed specifically for Lovell in Logan County, Oklahoma yet. Countywide channels for Logan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Guthrie (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 17 miles away.

About Lovell Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Lovell: Logan County Fire 155.8650 MHz, narrow FM, 94.8 PL. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Logan County Fire talkgroup 197 (hex c5).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Lovell, start with the Guthrie site of Oklahoma Wireless Interoperability Network (OKWIN) (P25), about 17 miles away. Its control channels: 859.2375, 860.2375 MHz.

Data updated .

Logan County channels that also cover Lovell

Fire Dispatch

Fire Dispatch frequencies for Logan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Logan County FireCounty Fire Dispatch155.8650
In 153.7850
94.8 PLFMNKNEM454

Oklahoma Wireless Interoperability Network (OKWIN) (P25)

Project 25

Oklahoma Wireless Interoperability Network (OKWIN) (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Logan County FireCounty Fire Dispatch197c5D
Logan County FireCounty Fire – Fireground138756bD
Logan County FireCounty Fire – Fireground138956dD
Logan County FireCounty Fire – Fireground3267cc3D

Nearest trunked radio sites

Distances are measured from the center of Lovell.

Guthrie · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 11 (hex B) · NAC 92C · about 17 mi away
Control 859.2375, 860.2375
Voice 853.2375, 856.2375, 857.2375, 858.2375
Enid · Enid
Site 1 (hex 1) · about 28 mi away
Control 154.0625
Voice 154.0325, 154.7475, 154.7625, 154.9725
North OKC · Oklahoma Multi-Agency Communications System (OMACS)
RFSS 1 · Site 2 (hex 2) · NAC 196 · about 35 mi away
Control 771.48125, 772.10625
Voice 770.05625, 770.55625, 772.98125, 773.63125, 774.13125, 774.68125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Lovell?

We do not have a fire dispatch channel listed specifically for Lovell. The county-level fire dispatch channels in the same county: Logan County Fire 155.8650 MHz, narrow FM, 94.8 PL.

Do fire departments and EMS use a trunked radio system in Lovell?

Yes. The county-level systems that cover Lovell are Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Lovell?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Lovell?

For Lovell, start with the Guthrie site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2375, 860.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.