Skip to content

Franklin Fire and EMS Frequencies

We do not have frequencies listed specifically for Franklin in Butler County, Pennsylvania yet. Countywide channels for Butler County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Butler Co Simulcast (ICORRS (Inter County Regional Radio System)), about 8 miles away.

About Franklin Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Franklin: Butler County Fire/EMS Paging 460.0625 MHz, narrow FM, CSQ. Trunked: ICORRS (Inter County Regional Radio System), for example Butler Co Fire talkgroup 1801 (hex 709).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: ICORRS (Inter County Regional Radio System): 23 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Franklin, start with the Butler Co Simulcast site of ICORRS (Inter County Regional Radio System), about 8 miles away. Its control channels: 858.0125, 858.5625, 858.9625 MHz.

Data updated .

Butler County channels that also cover Franklin

Fire Dispatch

Fire Dispatch frequencies for Butler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Butler County Fire/EMS PagingButler County Fire/EMS Paging460.0625CSQFMNWRAN557

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Butler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Butler County FireFire / EMS Tactical769.0063103.5 PLFMNWRCL651
Butler County FireFire / EMS Tactical769.0438103.5 PLFMNWRCL651
Butler County FireFire / EMS Tactical774.9313103.5 PLFMNWRCL651

ICORRS (Inter County Regional Radio System)

ICORRS (Inter County Regional Radio System) talkgroups
AgencyDescriptionTalkgroupHexMode
Butler Co FireButler Co Fire – Dispatch1801709T
Butler Co FireNorth180270aT
Butler Co FireSouth180370bT
Butler Co FireFire Operations180470cT
Butler Co FireFire Operations180570dT
Butler Co FireFire Operations180670eT
Butler Co FireFire Operations180770fT
Butler Co FireFire Operations1808710T
Butler Co FireFire Operations1809711T
Butler Co FireFire Police182171dT
Butler Co FireAir Operations1831727T
Butler Co FireAir Operations1832728T
ICORRS Systemwide InteropICORRS Fire20137ddD
ICORRS Systemwide InteropICORRS Fire20147deD
ICORRS Systemwide InteropICORRS Fire20157dfD
ICORRS Systemwide InteropICORRS Fire20167e0D
Butler Co EMSButler Co EMS – Dispatch185173bT
Butler Co EMSEMS Operations185273cT
ICORRS Systemwide InteropIcorrs EMS20097d9D
ICORRS Systemwide InteropIcorrs EMS20107daD
ICORRS Systemwide InteropIcorrs EMS20117dbD
ICORRS Systemwide InteropIcorrs EMS20127dcD
Butler Co EMSEMS Hospital185373dT

Nearest trunked radio sites

Distances are measured from the center of Franklin.

Butler Co Simulcast · ICORRS (Inter County Regional Radio System)
RFSS 1 · Site 9 (hex 9) · NAC 159 · about 8 mi away
Control 858.0125, 858.5625, 858.9625, 859.9625
Voice 854.7375, 856.6625, 857.5375
Grindstone (LAWR06) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 19 (hex 13) · NAC 94F · about 10 mi away
Control 151.175, 151.385
Voice 151.295
Woodbine (BUTL03) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 20 (hex 14) · NAC 94E · about 13 mi away
Control 151.0325, 161.825
Voice 155.405
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Franklin?

We do not have a fire dispatch channel listed specifically for Franklin. The county-level fire dispatch channels in the same county: Butler County Fire/EMS Paging 460.0625 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Franklin?

Yes. The county-level systems that cover Franklin are Fire and EMS talkgroups are listed for ICORRS (Inter County Regional Radio System): 23 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Franklin?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Franklin?

For Franklin, start with the Butler Co Simulcast site of ICORRS (Inter County Regional Radio System). Its control channels are 858.0125, 858.5625, 858.9625, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.