Skip to content

Riverside Fire and EMS Frequencies

We do not have frequencies listed specifically for Riverside in Northumberland County, Pennsylvania yet. Countywide channels for Northumberland County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Northumberland County), about 7 miles away.

About Riverside Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Riverside: Northumberland County Fire 151.1450 MHz, narrow FM, CSQ. Trunked: Northumberland County, for example Northumberland County Fire talkgroup 20001 (hex 4e21).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Northumberland County: 15 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Riverside, start with the Simulcast site of Northumberland County, about 7 miles away. Its control channels: 161.8, 161.8375, 161.875 MHz.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Northumberland County channels that also cover Riverside

Fire Dispatch

Fire Dispatch frequencies for Northumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Northumberland County FireFire/EMS Dispatch151.1450CSQFMNWQTC636

Northumberland County

Northumberland County talkgroups
AgencyDescriptionTalkgroupHexMode
Northumberland County FireFire Primary200014e21T
Northumberland County FireCounty Operations11270T
Northumberland County FireFire Operations200114e2bT
Northumberland County FireFire Operations200124e2cT
Northumberland County FireFire Operations200134e2dT
Northumberland County FireFire Operations200144e2eT
Northumberland County FireFire Operations200154e2fT
Northumberland County FireFire Operations200164e30T
Northumberland County FireFire Operations200174e31T
Northumberland County FireWater Supply200214e35T
Northumberland County FireFire Police South200314e3fT
Northumberland County FireFire Police North200414e49T
Northumberland County FireFire Talk-Around200514e53T
2 encrypted talkgroups (cannot be monitored)
Northumberland County encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Northumberland County FireCounty Operations11371T Encrypted
Northumberland County EMSMedical200324e40T Encrypted

Nearest trunked radio sites

Distances are measured from the center of Riverside.

Simulcast · Northumberland County
RFSS 1 · Site 1 (hex 1) · NAC 681 · about 7 mi away
Control 161.8, 161.8375, 161.875, 161.9125
Voice 161.95, 162
ECEN Simulcast · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 48 (hex 30) · NAC 941 · about 11 mi away
Control 161.825, 161.8625, 161.9
Voice 161.9375
Millville (COLU02) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 112 (hex 70) · NAC 942 · about 14 mi away
Control 153.1925, 153.305
Voice 154.665
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Riverside?

We do not have a fire dispatch channel listed specifically for Riverside. The county-level fire dispatch channels in the same county: Northumberland County Fire 151.1450 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Riverside?

Yes. The county-level systems that cover Riverside are Fire and EMS talkgroups are listed for Northumberland County: 15 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Riverside?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Riverside?

For Riverside, start with the Simulcast site of Northumberland County. Its control channels are 161.8, 161.8375, 161.875, 161.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.