Skip to content

Northumberland County Fire and EMS Frequencies

Northumberland County in Pennsylvania has 1 countywide conventional frequency and 15 countywide talkgroups in our database. Use the list of 47 cities and communities below for local fire departments and EMS agencies.

About Northumberland County Fire and EMS Frequencies

Quick answer: Fire dispatch for Northumberland County: Northumberland County Fire 151.1450 MHz, narrow FM, CSQ. Trunked: Northumberland County, for example Northumberland County Fire talkgroup 20001 (hex 4e21).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Northumberland County: 15 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Northumberland County, start with the Simulcast site of Northumberland County. Its control channels: 161.8, 161.8375, 161.875 MHz.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Northumberland County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Northumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Northumberland County FireFire/EMS Dispatch151.1450CSQFMNWQTC636

Northumberland County trunked talkgroups

Northumberland County

Northumberland County talkgroups
AgencyDescriptionTalkgroupHexMode
Northumberland County FireFire Primary200014e21T
Northumberland County FireCounty Operations11270T
Northumberland County FireFire Operations200114e2bT
Northumberland County FireFire Operations200124e2cT
Northumberland County FireFire Operations200134e2dT
Northumberland County FireFire Operations200144e2eT
Northumberland County FireFire Operations200154e2fT
Northumberland County FireFire Operations200164e30T
Northumberland County FireFire Operations200174e31T
Northumberland County FireWater Supply200214e35T
Northumberland County FireFire Police South200314e3fT
Northumberland County FireFire Police North200414e49T
Northumberland County FireFire Talk-Around200514e53T
2 encrypted talkgroups (cannot be monitored)
Northumberland County encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Northumberland County FireCounty Operations11371T Encrypted
Northumberland County EMSMedical200324e40T Encrypted

Radio system sites in Northumberland County

Program the control channel first; your scanner finds the voice channels from it.

Simulcast · Northumberland County
RFSS 1 · Site 1 (hex 1) · NAC 681
Control 161.8, 161.8375, 161.875, 161.9125
Voice 161.95, 162
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Northumberland County

Common questions

What frequency does the fire department use in Northumberland County?

Fire dispatch channels listed for Northumberland County: Northumberland County Fire 151.1450 MHz, narrow FM, CSQ.

Do fire departments and EMS use a trunked radio system in Northumberland County?

Yes. Fire and EMS talkgroups are listed for Northumberland County: 15 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Northumberland County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Northumberland County?

For Northumberland County, start with the Simulcast site of Northumberland County. Its control channels are 161.8, 161.8375, 161.875, 161.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Northumberland County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Northumberland County are marked encrypted.

Are Northumberland County fire and EMS talkgroups encrypted?

2 of the 15 talkgroups listed for Northumberland County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.