About Fairview-Ferndale Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fairview-Ferndale: Northumberland County Fire 151.1450 MHz, narrow FM, CSQ. Trunked: Northumberland County, for example Northumberland County Fire talkgroup 20001 (hex 4e21).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Northumberland County: 15 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Fairview-Ferndale, start with the Simulcast site of Northumberland County, about 7 miles away. Its control channels: 161.8, 161.8375, 161.875 MHz.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Northumberland County channels that also cover Fairview-Ferndale
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Northumberland County Fire | Fire/EMS Dispatch | 151.1450 | CSQ | FMN | WQTC636 |
Northumberland County
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Northumberland County Fire | Fire Primary | 20001 | 4e21 | T |
| Northumberland County Fire | County Operations | 112 | 70 | T |
| Northumberland County Fire | Fire Operations | 20011 | 4e2b | T |
| Northumberland County Fire | Fire Operations | 20012 | 4e2c | T |
| Northumberland County Fire | Fire Operations | 20013 | 4e2d | T |
| Northumberland County Fire | Fire Operations | 20014 | 4e2e | T |
| Northumberland County Fire | Fire Operations | 20015 | 4e2f | T |
| Northumberland County Fire | Fire Operations | 20016 | 4e30 | T |
| Northumberland County Fire | Fire Operations | 20017 | 4e31 | T |
| Northumberland County Fire | Water Supply | 20021 | 4e35 | T |
| Northumberland County Fire | Fire Police South | 20031 | 4e3f | T |
| Northumberland County Fire | Fire Police North | 20041 | 4e49 | T |
| Northumberland County Fire | Fire Talk-Around | 20051 | 4e53 | T |
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Northumberland County Fire | County Operations | 113 | 71 | T Encrypted |
| Northumberland County EMS | Medical | 20032 | 4e40 | T Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Fairview-Ferndale.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fairview-Ferndale?
We do not have a fire dispatch channel listed specifically for Fairview-Ferndale. The county-level fire dispatch channels in the same county: Northumberland County Fire 151.1450 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Fairview-Ferndale?
Yes. The county-level systems that cover Fairview-Ferndale are Fire and EMS talkgroups are listed for Northumberland County: 15 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Fairview-Ferndale?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Fairview-Ferndale?
For Fairview-Ferndale, start with the Simulcast site of Northumberland County. Its control channels are 161.8, 161.8375, 161.875, 161.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.