About Shamokin Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Shamokin: Northumberland County Fire 151.1450 MHz, narrow FM, CSQ. Trunked: Northumberland County, for example Northumberland County Fire talkgroup 20001 (hex 4e21).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Northumberland County: 15 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Shamokin, start with the Simulcast site of Northumberland County, about 7 miles away. Its control channels: 161.8, 161.8375, 161.875 MHz.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Northumberland County channels that also cover Shamokin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Northumberland County Fire | Fire/EMS Dispatch | 151.1450 | CSQ | FMN | WQTC636 |
Northumberland County
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Northumberland County Fire | Fire Primary | 20001 | 4e21 | T |
| Northumberland County Fire | County Operations | 112 | 70 | T |
| Northumberland County Fire | Fire Operations | 20011 | 4e2b | T |
| Northumberland County Fire | Fire Operations | 20012 | 4e2c | T |
| Northumberland County Fire | Fire Operations | 20013 | 4e2d | T |
| Northumberland County Fire | Fire Operations | 20014 | 4e2e | T |
| Northumberland County Fire | Fire Operations | 20015 | 4e2f | T |
| Northumberland County Fire | Fire Operations | 20016 | 4e30 | T |
| Northumberland County Fire | Fire Operations | 20017 | 4e31 | T |
| Northumberland County Fire | Water Supply | 20021 | 4e35 | T |
| Northumberland County Fire | Fire Police South | 20031 | 4e3f | T |
| Northumberland County Fire | Fire Police North | 20041 | 4e49 | T |
| Northumberland County Fire | Fire Talk-Around | 20051 | 4e53 | T |
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Northumberland County Fire | County Operations | 113 | 71 | T Encrypted |
| Northumberland County EMS | Medical | 20032 | 4e40 | T Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Shamokin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Shamokin?
We do not have a fire dispatch channel listed specifically for Shamokin. The county-level fire dispatch channels in the same county: Northumberland County Fire 151.1450 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Shamokin?
Yes. The county-level systems that cover Shamokin are Fire and EMS talkgroups are listed for Northumberland County: 15 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Shamokin?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Shamokin?
For Shamokin, start with the Simulcast site of Northumberland County. Its control channels are 161.8, 161.8375, 161.875, 161.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.