Skip to content

Perry County Fire and EMS Frequencies

Perry County in Pennsylvania has 12 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 29 cities and communities below for local fire departments and EMS agencies.

About Perry County Fire and EMS Frequencies

Quick answer: Fire dispatch for Perry County: Perry County Fire 155.1525 MHz, narrow FM, 179.9 PL.

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Perry County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Perry County FirePerry County Fire – Dispatch155.1525
In 150.7900
179.9 PLFMNWQVF574

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Perry County FireOperations151.0250146.2 PLFMNWQVF574
Perry County FireOperations154.8825156.7 PLFMNWQYS528
Perry County FireOperations155.2575
In 153.7925
NAC 257P25WQVF574
Perry County FireOperations158.8575
In 151.3175
NAC 857P25WQVF574
Perry County FireOperations159.3150
In 154.0025
NAC 315P25WQVF574

Fire Talk-around

Fire Talk-around frequencies for Perry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Low Band Fire 1Low Band Fire46.2000FMKEY986
Low Band Fire 2Low Band Fire46.0600FMKEY986
Low Band Fireground 1Low Band Fireground46.3000FMKEY986
Low Band Fireground 2Low Band Fireground45.8200FM—
New Bloomfield Borough FireFire Vehicle Repeater System453.9875FMNWQHG534
New Bloomfield Borough FireFire UHF Simplex458.9875FMNWQHG534

Radio system sites in Perry County

Program the control channel first; your scanner finds the voice channels from it.

Blain (PERR01) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 51 (hex 33) · NAC 943
Control 158.7975, 159.2175
Voice 159.2325
Newport UHF (PERR86) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 72 (hex 48) · NAC 94A
Control 453.625, 453.8375
Voice 453.15
Three Square Hollow · South Central Interoperability Network
RFSS 1 · Site 42 (hex 2A) · NAC 1E2
Control 851.4, 851.7, 852.05, 852.3125
Voice 851.05, 852.6
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Perry County

Common questions

What frequency does the fire department use in Perry County?

Fire dispatch channels listed for Perry County: Perry County Fire 155.1525 MHz, narrow FM, 179.9 PL.

What scanner do I need to listen to fire and EMS in Perry County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Perry County?

For Perry County, start with the Blain (PERR01) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 158.7975, 159.2175 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Perry County fire and EMS frequencies encrypted?

None of the 12 conventional frequencies listed for Perry County are marked encrypted.