About Northeast Madison Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Northeast Madison: Perry County Fire 155.1525 MHz, narrow FM, 179.9 PL.
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Perry County channels that also cover Northeast Madison
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Perry County Fire | Perry County Fire – Dispatch | 155.1525 In 150.7900 | 179.9 PL | FMN | WQVF574 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Perry County Fire | Operations | 151.0250 | 146.2 PL | FMN | WQVF574 |
| Perry County Fire | Operations | 154.8825 | 156.7 PL | FMN | WQYS528 |
| Perry County Fire | Operations | 155.2575 In 153.7925 | NAC 257 | P25 | WQVF574 |
| Perry County Fire | Operations | 158.8575 In 151.3175 | NAC 857 | P25 | WQVF574 |
| Perry County Fire | Operations | 159.3150 In 154.0025 | NAC 315 | P25 | WQVF574 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Low Band Fire 1 | Low Band Fire | 46.2000 | FM | KEY986 | |
| Low Band Fire 2 | Low Band Fire | 46.0600 | FM | KEY986 | |
| Low Band Fireground 1 | Low Band Fireground | 46.3000 | FM | KEY986 | |
| Low Band Fireground 2 | Low Band Fireground | 45.8200 | FM | — | |
| New Bloomfield Borough Fire | Fire Vehicle Repeater System | 453.9875 | FMN | WQHG534 | |
| New Bloomfield Borough Fire | Fire UHF Simplex | 458.9875 | FMN | WQHG534 |
Nearest trunked radio sites
Distances are measured from the center of Northeast Madison.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Northeast Madison?
We do not have a fire dispatch channel listed specifically for Northeast Madison. The county-level fire dispatch channels in the same county: Perry County Fire 155.1525 MHz, narrow FM, 179.9 PL.
What scanner do I need to listen to fire and EMS in Northeast Madison?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Northeast Madison?
For Northeast Madison, start with the Blain (PERR01) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 158.7975, 159.2175 MHz. Program a control channel first; the scanner finds the voice channels from it.