About Fawn Lake Forest Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fawn Lake Forest: Pike County Fire 155.2650 MHz, narrow FM, 173.8 PL.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Pike County channels that also cover Fawn Lake Forest
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Fire | Fire/EMS Paging | 155.2650 | 173.8 PL | FMN | WNQZ390 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Fire | Fireground 2 – East | 153.9500 | 173.8 PL | FMN | WSEU923 |
| Pike County Fire | Fireground 3 – Landing Zone Operations | 154.1600 | 173.8 PL | FMN | WQLL810 |
| Pike County Fire | Fireground 4 – West/Water Rescue Incidents | 154.1900 | 173.8 PL | FMN | WQLL810 |
| Pike County Fire | Fireground 5 – Alternate/Fire Police | 154.2500 | 173.8 PL | FMN | WQLL810 |
| Pike County Fire | Pike County Fire – Response | 154.4450 In 153.7700 | 173.8 PL | FMN | WNHQ590 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Fire | Fire Low Band B | 33.8600 | CSQ | FM | KNCM850 |
| Pike County Fire | Fire Low Band A | 46.1800 | CSQ | FM | KNCM850 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County EMS | Pike County EMS – Response | 151.2575 In 153.8600 | 69.3 PL | FMN | WQLN531 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County EMS | Pike County EMS – Alternate | 155.1600 | 173.8 PL | FMN | WNNQ553 |
Nearest trunked radio sites
Distances are measured from the center of Fawn Lake Forest.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fawn Lake Forest?
We do not have a fire dispatch channel listed specifically for Fawn Lake Forest. The county-level fire dispatch channels in the same county: Pike County Fire 155.2650 MHz, narrow FM, 173.8 PL.
What scanner do I need to listen to fire and EMS in Fawn Lake Forest?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Fawn Lake Forest?
For Fawn Lake Forest, start with the Indian Orchard (WAYN31) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 154.7925, 154.92 MHz. Program a control channel first; the scanner finds the voice channels from it.