About Pike County Fire and EMS Frequencies
Quick answer: Fire dispatch for Pike County: Pike County Fire 155.2650 MHz, narrow FM, 173.8 PL.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Pike County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Fire | Fire/EMS Paging | 155.2650 | 173.8 PL | FMN | WNQZ390 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Fire | Fireground 2 – East | 153.9500 | 173.8 PL | FMN | WSEU923 |
| Pike County Fire | Fireground 3 – Landing Zone Operations | 154.1600 | 173.8 PL | FMN | WQLL810 |
| Pike County Fire | Fireground 4 – West/Water Rescue Incidents | 154.1900 | 173.8 PL | FMN | WQLL810 |
| Pike County Fire | Fireground 5 – Alternate/Fire Police | 154.2500 | 173.8 PL | FMN | WQLL810 |
| Pike County Fire | Pike County Fire – Response | 154.4450 In 153.7700 | 173.8 PL | FMN | WNHQ590 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Fire | Fire Low Band B | 33.8600 | CSQ | FM | KNCM850 |
| Pike County Fire | Fire Low Band A | 46.1800 | CSQ | FM | KNCM850 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County EMS | Pike County EMS – Response | 151.2575 In 153.8600 | 69.3 PL | FMN | WQLN531 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County EMS | Pike County EMS – Alternate | 155.1600 | 173.8 PL | FMN | WNNQ553 |
Radio system sites in Pike County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Pike County
Common questions
What frequency does the fire department use in Pike County?
Fire dispatch channels listed for Pike County: Pike County Fire 155.2650 MHz, narrow FM, 173.8 PL.
What scanner do I need to listen to fire and EMS in Pike County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Pike County?
For Pike County, start with the Milford (PIKE33) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 154.0325, 154.115 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Pike County fire and EMS frequencies encrypted?
None of the 10 conventional frequencies listed for Pike County are marked encrypted.