Skip to content

Fox Fire and EMS Frequencies

We do not have frequencies listed specifically for Fox in Sullivan County, Pennsylvania yet. Countywide channels for Sullivan County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bodine Mtn (LYCO15) (PA-STARNet: Pennsylvania Statewide Radio Network), about 14 miles away.

About Fox Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Fox: Sullivan County Fire & EMS 154.1300 MHz, narrow FM, 167.9 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Sullivan County channels that also cover Fox

Fire Dispatch

Fire Dispatch frequencies for Sullivan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sullivan County Fire & EMSDispatch F1 / Talkaround F5154.1300
In 150.8050
167.9 PLFMNWPPA300

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sullivan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sullivan County Fire & EMSRepeaters (input varies) F2-F4 / Command F6154.0700
In 159.0750
167.9 PLFMNWPPA300
Sullivan County Fire & EMSFire Operations F7154.3025167.9 PLFMNWPMQ547
Sullivan County Fire & EMSFire RIT F10158.9325167.9 PLFMNWPMQ547

Fire Talk-around

Fire Talk-around frequencies for Sullivan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sullivan County Fire & EMSWater Supply F8154.3475167.9 PLFMNWPMQ547
Sullivan County Fire & EMSFire Police F9155.9925167.9 PLFMNWPMQ547

Nearest trunked radio sites

Distances are measured from the center of Fox.

Bodine Mtn (LYCO15) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 116 (hex 74) · NAC 947 · about 14 mi away
Control 159.1125, 159.1275
Voice 152.125
North Mtn (SULL01) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 102 (hex 66) · NAC 94D · about 18 mi away
Control 151.4525, 152.695
Voice 152.745
Mt Pisgah (BRAD31) · PA-STARNet: Pennsylvania Statewide Radio Network
RFSS 1 · Site 113 (hex 71) · NAC 945 · about 19 mi away
Control 153.5825, 153.725
Voice 154.9425
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Fox?

We do not have a fire dispatch channel listed specifically for Fox. The county-level fire dispatch channels in the same county: Sullivan County Fire & EMS 154.1300 MHz, narrow FM, 167.9 PL.

What scanner do I need to listen to fire and EMS in Fox?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Fox?

For Fox, start with the Bodine Mtn (LYCO15) site of PA-STARNet: Pennsylvania Statewide Radio Network. Its control channels are 159.1125, 159.1275 MHz. Program a control channel first; the scanner finds the voice channels from it.